Off The Main - Glasgow a scenario for the WCML North route v 1.0

IMPORTANT
=========
Off the Main - Glasgow is a "Timetabled Scenario." This is a fourth
option, in addition to Free Roam, Standard and Career modes. There have
been very few of this type of scenario since the earliest days of
Railsimulator, but it still seems to be supported.

In this type of scenario, you will "hop on and off" various trains in
the process of finishing the scenario. It is timetabled in the sense that
if you do not stay on time, you will miss your connection and be unable to complete
the scenario.

In OTM-Glasgow
You will start on Platform 3 of Glasgow Central Station and wait for
the arrival of your first train. Board the train by clicking on it,
as you would in a free roam scenario, however your route is determined
as if you were playing a standard scenario.
You will drive train 1 to a suburban station south of Glasgow, where
you will exit, by pressing the "8" key and take a short walk over the
hill to the location where you will wait for your second train.
Board train 2 by again clicking on it. This train is an express directly to
Coatsbridge Yard, taking you through an area that has recently been
created for TS-2012.
At Coatbridge you exit and cross the tracks to board a freight run,
picking up TTA wagons on your way west again through new areas,
well off the Main Line.
Finally you take control of an express passsenger run, through Motherwell
to the branch line taking to your final destination, the Lower Level of
Glasgow Central.

Install
=======

First obtain and install the route.

This scenario was designed with the "WCML North" route obtained from the
DLC Steam Store.

This package contains two .rwp Railsimulator 2012 installation files
OTM_Default uses only default rolling stock as provided with the route or as a part
of the standard Railsimulator 2012 software.

OTM_Full makes use of the UKTS Freeware Packs available at
Railworks America and UKTrainsim - see the OTM_Equip.txt file
for additional source information

Next install any required rollingstock files ( see above.) Note:
UKTS Freeware Packs come with their own installer/updater software
and user manuals.

Install:
OTM_Default.rwp
And/OR
OTM_Full.rwp

with Package Manager. Find it via the tab on the opening page.

While the two versions of the scenario follow the same route, you
will drive different locomotives. You may want to try both.
Beta testers report that the full version is easier to drive.

------------------------------------------------------------------------------------------------------
IMPORTANT NOTE:

If your moves are far outside the intended timings, you MAY miss your
intended connections. In a Timetabled Scenario the trains will leave
without you. Consult either the f1 or f4 displays for intended arrival times.

As with any complex scenario - SAVE OFTEN.

--------------------------------------------------------------------------------------------------------
NOTES:

It is intended that you drive this scenario from inside the cab of your
locomotive, using view 1 and view shift-2. However in order to see all of
the traffic surrounding your train you may want to re-run the scenario
using the "outside" views.

If you experience "jittering" due to low frame redraw rates, lower your graphics settings
on the main page.

======

Your comments are welcome (actually desired)
via email at jbfried@rochester.rr.com
also:
private message
Freidy at UKtrainsim
JimBF at trainsim.com forums

Version History:
0.5 beta test version
1.0 original posting