by Buzz Baxter (buzz456)
This is a re-paint of DTM's excellent Alco FA iconic units in the elegant Wabash livery.
The FA's didn't last real long but they certainly made their mark in railroading history.
This is a re-paint of DTM's excellent Alco FA iconic units. The FA's didn't last real long but they certainly made their mark in railroading history.
To use these you need the DTM PRR FA-1 & FA-2 Loco Add-On (download this payware DLC from the Steam store). Make sure that you have the latest version. If you are not sure look and see if the antenna in the PRR locomotive is a child object. If it is you have the latest one.
Run the installer for for the two locomotives and their B units. Then copy the GeoPcDX files from the PRR unit and paste them into the WAB units. Both the Engine and the EngineFA2 each have two Geos one for the A unit and one for the B unit. They are not the same as the FA2 is longer.
The PRR version needs to be checked as well as the WAB in the scenario editor for these to show up properly in a scenario.
I added a A200 horn from JHM which is much louder than than the one that came with the package. If you don't care for it just remove the .dav files in the audio folder and the game will go back to using the ones in the .ap folder. I didn't reconfigure anything so there is nothing else to change.
Enjoy these elegant locomotives,
Buzz456 at RWA
Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.
DTG's Required Disclaimer
"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.
This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.
The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."
We have 2441 guests and no members online