by Buzz Baxter (buzz456)
This is a repaint of the the Smokebox Challenger.
You have to choose the version you want, so make sure to read the description first.
Then select the correct file from the list below.
Overland version of the Smokebox Challenger
This is a couple of pretty large files so please only d/l either if you plan to use them.
The straight Overland version has both the high detail (HD) and the standard detail (SD) .
HD has everything, including all the nuts, bolts, rivets and other small details.
SD leaves out many nuts, bolts, rivets and other small details. Its geometry file size is
considerably smaller than that of the HD version, yielding an increase in frame rate. It's the
version that is recommended for less capable PCs.
The SD only version contains only the SD loco so higher frame rates are to be expected and of course much less disk space used. If you d/l the regular one there is no reason to get the SD one since it is included in the full one.
I included all of the numbers in the series with both the "wind wings" and without. Just editing the Ch_number DCSV file will allow you to control what you see. See the manual if you need help with this.
Installation
You need the Smokebox Challenger for this to work.
https://store.steampowered.com/app/1922045/Train_Simulator_Union_Pacific_Heavy_Challenger_Steam_Loco_AddOn/
Run the installer or drill down and copy and paste the Overland folder into the Assets/Smokebox/UP3900/RailVehicles folder. Then go into the default model and copy the Locomotive and the LocomotiveSD GEOPCDX Files and paste them into the Overland/Engine folder. Then do the same with the Tender and TenderSD GEOPCDX files.
You should be good to go.
Enjoy,
Buzz456 at RWA
Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.
DTG's Required Disclaimer
"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.
This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.
The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."
We have 3987 guests and no members online
