Erie Mining Co F9

Version:: TS 2020
Uploaded:: Sunday, 04 October 2020
Hits:: 2232
Downloads:: 128

Erie Mining Co F9 by Buzz Baxter (Buzz456)

Erie Mining Co F9.zip - 7.2 MB

Description: The railroad was the last to use F9 units in revenue service in the United States, until Indiana Boxcar Corporation purchased two F9s for use on the Vermilion Valley Railroad in western Indiana/eastern Illinois. It also had some of the last few Griswold rotating signals in full operation (now removed). It also featured a 100-foot-long trestle and the Cramer Tunnel.

This would be a fun candidate for a route for someone some day. In the meantime it fits in with the mine on the RWA Route.

To get this all complete you will need both the Feather River Route and the Clinchfield however it will mostly work with just the Feather River Route.

Installation is a little different here. The A unit and one of the B units is based on the FeatherRiver F7. To install run the installer or drill down and put them in the proper place. You will need to copy the entire CabView folder from the Default F7 into the EMC folder. Then copy the AUnit_36_37CFe.GeoPcDx and the BUnit_36_37e.GeoPcDx from the default and paste them into the EMC Engine Folder. You will have both the A and B units here.

Looking at the prototype B Units I noticed that Erie Mining B Units were all of the three porthole version sooo I painted up the Clinchfield Grey B unit to reflect this. To install this you will need to copy the C_F7_BUnit_Grey.GeoPcDx file from the Clinchfield\RailVehicles\Diesel\F7\Default Engine folder and paste it into the EMC Engine folder.

Once again I want to thank Kevin Schulz from searchlight Simulations for the side decals for these locomotives.

To get all this to show up properly you need to have DTG FeatherRiver checked, DTG Clinchfield checked and SearchlightSimmulations FeatherRiver checked in the Asset list.

I hope to do a weathered version of this when I get the time.

Enjoy,

Buzz456 at RWA

Please accept license agreement before downloading

Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.

DTG's Required Disclaimer

"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.

This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.

The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."