Adriana County Dash 9

Version:: TS 2016
Uploaded:: Saturday, 03 September 2016
Hits:: 4554
Downloads:: 1031

Adriana County Dash 9 by Steven D. Myers (tagsdm)

ACDX_Dash9.zip - 9.6 MB

Dash 9 in fictional Adriana County livery

Description: Adriana County Dash 9 repaint pack by tagsdm

There has been some interest in heavyweight power for the Adriana County route, so included is a repaint of the Dash 9 that is part of the PennCoal route. It's lettered for the freelanced Adriana County route by LtBligh, available at the Steam Workshop. If you don't have this route you're missing a wonderful modern-era railroading experience. Markings are fictional, as is the route itself, and autonumbering is used. The larger engines can be especially useful if you've built a Marlane bypass to allow through trains from Henderson to Clairbourne and back. You can run some really long trains from either of those two large yards.

!!!You must own the Norfolk Southern Coal District Route (AKA PennCoal) available from Steam to use this repaint!!!
http://store.steampowered.com/app/258654/?snr=1_5_9__205

If you have a full install of TS2016 then you should have PennCoal anyway, as the route is included with TS2016, full install. You shouldn't have to purchase anything in that event. If you do not have a full install, you'd have to purchase the route seperately.

To install this repaint, extract the ACDX_Dash9.rwp to a convenient location for you (like your desktop) and install using the Package Manager utility located in your Railworks main folder. You should find a new folder named ACDX_Dash9 in ...Assets\RSC\PennCoal\RailVehicles\Diesel\ after installing.

Now the file copying...

First, navigate to your...\Assets\RSC\PennCoal\RailVehicles\Diesel\Dash9\NS\Engine folder and copy the Dash9-NS.GeoPcDx file.
Then navigate to your ...\Assets\RSC\PennCoal\RailVehicles\Diesel\ACDX_Dash9\NS\Engine folder and paste the Dash9-NS.GeoPcDx file there.
Next, navigate to your ...\Assets\RSC\PennCoal\RailVehicles\Diesel\Dash9\NS\CabView folder and copy the dash9-40cw_cab.GeoPcDx file.
Then navigate to your ...\Assets\RSC\PennCoal\RailVehicles\Diesel\ACDX_Dash9\NS\CabView folder and paste the dash9-40cw_cab.GeoPcDx file there.

That should do it!

To use in a scenario, be sure RSC and PennCoal are checked in the editor. You should find 2 new entries in the locomotive flyout on the left. They are...

ACDX_xPC Dash 9-40CW
ACDX_xPC Dash 9-40CW_ND

Just select an ACDX_xPC Dash9-40CW, place it on the rails, add a driver and you're off. Use the ND (No Driver) version in the middle or the end of a lash up, or as a scenery item.

All credit for the model and original textures goes to RSC and it's associates and developers. I did only the ACDX repaints. Files uploaded to RWA only. Please do not redistribute.

Neither I nor the original builders of the model will accept any responsibility for any damage, real or imagined, to your system by using these files. There shouldn't be any, though. Hope you enjoy!

Please accept license agreement before downloading

Please remember even those this file is free, the author still has rights to the file. Be sure to read the readme that is enclosed for further copyright information and instructions to install the file.

DTG's Required Disclaimer

"IMPORTANT NOTICE. Everything on this site is user generated content designed for use with RailSimulator.com Limited’s train simulation products, including RailWorks 4: Train Simulator 2013, Train Simulator 2014 and Train Simulator 2015. RailSimulator.com Limited does not approve or endorse this user generated content and does not accept any liability or responsibility regarding it.

This user generated content has not been screened or tested by RailSimulator.com Limited. Accordingly, it may adversely affect your use of RailSimulator.com’s products. If you install this user generated content and it infringes the rules regarding user-generated content, RailSimulator.com Limited may choose to discontinue any support for that product which they may otherwise have provided.

The RailWorks EULA sets out in detail how user generated content may be used, which you can review further here: www.railsimulator.com/terms. In particular, this user generated content includes work which remains the intellectual property of RailSimulator.com Limited and which may not be rented, leased, sub-licensed, modified, adapted,copied, reproduced or redistributed without the permission of RailSimulator.com Limited."