Loco does not appear in Object browser
First unread post • 3 posts
• Page 1 of 1
Loco does not appear in Object browser
by Railfan49 » Thu Dec 27, 2012 5:08 pm
I have a EMD SW1500 switcher that I use in a scenario on a route. I am creating another scenario on a different route and the switcher does not appear in the object browser as a choice.Why doesn't all the loco's appear in the object browser on all the routes?
- Railfan49
- Posts: 43
- Joined: Tue Dec 25, 2012 7:43 pm
- Location: New York
Re: Loco does not appear in Object browser
by buzz456 » Thu Dec 27, 2012 5:46 pm
You need to click the little blue box on the left object box and then go over and check the author and type in the right flyout. Then it should show up as a choice.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20939
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Loco does not appear in Object browser
by Railfan49 » Thu Dec 27, 2012 6:15 pm
Thanks buzz.............found it!!!!
- Railfan49
- Posts: 43
- Joined: Tue Dec 25, 2012 7:43 pm
- Location: New York
3 posts
• Page 1 of 1
Return to Problems and Peculiarities
Who is online
Users browsing this forum: No registered users and 4 guests