This is the Siemens ACS-64 Traction Physics Upgrade Pack.

In order to utilize this freeware physics upgrade, you must have purchased the NEC: New York - New Haven Route Add-On avaliable at Steam: http://store.steampowered.com/app/258643/

This is a freeware pack; in no way is it to be used for commercial purposes. You are free, however to further modify the physics enhancements found in this pack for personal use if you so choose.

THIS IS NOT A SOUND UPGRADE PACK.

The purpose of this pack is to allow the player to run the ACS-64 in either Boost Mode (6400 kW) or Continuous Mode (5000 kW).

Parameter Change Log:
1. Three different "tractive effort vs speed" files included; one for boost mode, one for continuous mode, and the default text file that the game engine reads.
2. Maximum sustainable speed increased to 125 mph via changes to .bin file parameters.
3. Regenerative brake adjusted to operate down to 1 mph. Maximum effort (34,000 lbs) available from 75 mph down to 3 mph.
4. Ampere parameters adjusted so that 1 amp is = to 1 kN; maximum tractive amps/kN = 320, maximum braking amp/kN = 150.

IMPORTANT; Install Instructions; REMEMBER TO ALWAYS CREATE BACKUP FILES TO REVERT TO INCASE THE INSTALLATION DOES NOT WORK AS PLANNED!

1. Open the "NewYorkNewHavenAssets.ap" pack file with .7z
2. Proceed to open folders until the .7z directory reads "C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NewYorkNewHaven\NewYorkNewHavenAssets.ap\RailVehicles\Electric\ACS-64\Default\Simulation\".
3. Then open the "Railworks_ACS-64_Traction_Physics_Mod.rar" file.
4. Highlight all files in the .rar file and drag them into the .ap file directory.
5. Click "OK" when it asks you to Confirm File Copy.
6. The installation should be complete.
7. Extract the contents of the .rar file into the following directory (C:\Program Files (x86)\Steam\SteamApps\common\RailWorks\Assets\RSC\NewYorkNewHaven) in order to easy the process of switching between modes as described in the following set of instructions.

Utilization instructions:
1. The premise of this pack is that you can only run the ACS-64 in one mode at any one time.
2. The default mode of the pack is "boost mode."
2b. Notice that in addition to the "TractiveEffortVsSpeed" text file (default file), there are two other files; Boost = "TractiveEffortVsSpeed (6400kW)" and Continuous = "TractiveEffortVsSpeed (5000kW)".
3. Before playing TS2014, choose the version you want to run (boost or continuous), then proceed open "TractiveEffortVsSpeed" AND the text file that corresponds to the mode you wish to operate in which would be located in the directory stated in step 7 of the install instructions.
4. Select (CTRL + A) and copy (CTRL + C) all contents in the text file that corresponds to the mode you chose, and then select (CTRL + A) all contents in the "TractiveEffortVsSpeed" file and paste (CTRL + V) over the text until both files open are identical.
5. Save the default file.
6. Repeat steps 1 and 2 from the install instructions.
7. Drag the "TractiveEffortVsSpeed" text file into the .ap file directory and overwite when prompted.
8. The installation should be complete. Run TS2014 to check.
9. If you wish to change the mode you are running in at any time, exit out of TS2014, and repeat steps 3 through 7.

Thank you for downloading and installing.
Enjoy =)