Got an issue. I was trying to re-skin a 40ft container from the mega pack @ Trainsim.com Copied the bin. and renamed it. Also, I copied the GEOPCDX file and the texture files. I then repainted the texture file. After I finished the repaint, I loaded it into the game, and then nothing, but a block with missing textures. Any help? Is repainting a scenery object, different than a rolling stock item?
Really need help here.
Thanks
Repainting problems
Repainting problems
by 5292nate » Sun Feb 03, 2013 12:08 pm
You do not have the required permissions to view the files attached to this post.
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
Re: Repainting problems
by artimrj » Sun Feb 03, 2013 12:11 pm
I would guesss the bin file you copied is looking for the textures in the folders that you copied them from and you have your repaint in a new folder. So you will have to edit the BIN file to point to your new folder.
Bob Artim - Generation X²
I don't have a PHD, I have a DD214... Freedom carries sacrifice
I'm crawling in the dark looking for the answer
I don't have a PHD, I have a DD214... Freedom carries sacrifice
I'm crawling in the dark looking for the answer
-
artimrj - Posts: 4749
- Joined: Sun Jan 31, 2010 3:07 pm
- Location: Beaver, Pennsylvania
Re: Repainting problems
by 5292nate » Sun Feb 03, 2013 12:16 pm
Where is the texture path in my bin folder?
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
Re: Repainting problems
by 5292nate » Sun Feb 03, 2013 12:16 pm
No. The repaints are in the same folder as the originals I copied it from.
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
Re: Repainting problems
by buzz456 » Sun Feb 03, 2013 12:28 pm
Have you named it something new?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20940
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Repainting problems
by buzz456 » Sun Feb 03, 2013 12:31 pm
Nathan, do you know how to turn the bin file into a xml so you can edit it?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20940
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Repainting problems
by 5292nate » Sun Feb 03, 2013 12:57 pm
To Buzz. I did change the name to something new. I do know how to convert it to an XML. That's how I edited it.
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
Re: Repainting problems
by buzz456 » Sun Feb 03, 2013 1:24 pm
You run the bin file with serz and that will make a xml. The you open it in notepad so you can edit it. After you do that you need to run the xml file over serz (I keep it on my desk top) and that will change the bin file.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20940
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Repainting problems
by 5292nate » Sun Feb 03, 2013 1:26 pm
I know. That's what I did.
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
Re: Repainting problems
by buzz456 » Sun Feb 03, 2013 1:54 pm
Sorry I didn't read your post right. Did you remember to run it to change the bin file after? That's the step I always forget. Another thing is to make sure you changed it everywhere you need to.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20940
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Repainting problems
by 5292nate » Sun Feb 03, 2013 2:01 pm
Yeah. I changed the bin back. Why don't you try it? See if it comes out differently. It's in the file library under RS rolling stock, 8th page, near the bottom. http://www.trainsim.com/vbts/tslib.php? ... 946&page=8
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
Re: Repainting problems
by buzz456 » Sun Feb 03, 2013 2:24 pm
Just so I know I'm messing with the right one, we are talking the us-cont2.zip right?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20940
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Repainting problems
by 5292nate » Sun Feb 03, 2013 2:27 pm
Right. I was copying the Cont_40ft_001 bin. It's kinda hard to find. Took me a bit. The containers are in Kuju\RailSimulator\RailNetwork\Interactive
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
Re: Repainting problems
by buzz456 » Sun Feb 03, 2013 2:34 pm
5292nate wrote:Right. I was copying the Cont_40ft_001 bin. It's kinda hard to find. Took me a bit. The containers are in Kuju\RailSimulator\RailNetwork\Interactive
I'm sure glad you told me where these things were. Do you mean the Conti_40ft-48ft_01 ?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20940
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Repainting problems
by 5292nate » Sun Feb 03, 2013 2:37 pm
This is the one. Conti_1x_40ft_001
"The trouble with a one track mind is it's narrow gauge and lack of switching controls." - Buzz Baxter
-
5292nate - Posts: 1622
- Joined: Sat Nov 10, 2012 12:14 pm
- Location: Upstate New York
23 posts
• Page 1 of 2 • 1, 2
Return to Problems and Peculiarities
Who is online
Users browsing this forum: No registered users and 7 guests