Problem with Searchlight Simulation and High Iron Simulations

Post your problems and installation issues here!

Problem with Searchlight Simulation and High Iron Simulations

Unread postby qwhite451 » Wed Feb 05, 2020 1:46 am

Is there a way i can use the enhancement packs with the High Iron scenario packs without them breaking i tried to use the enhancement packs with the Montana Hi Line scenario pack and all of the scenarios are broken ...im looking for any kind of help or advice to fix the problem..thank you
qwhite451
 
Posts: 61
Joined: Thu Dec 05, 2013 5:55 pm

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby BoostedFridge » Wed Feb 05, 2020 3:52 am

In which way are they 'broken'?
User avatar
BoostedFridge
 
Posts: 2277
Joined: Sat Aug 24, 2013 6:39 am
Location: Vancouver, BC

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby BNSFdude » Wed Feb 05, 2020 4:14 am

If it's signals being red or other things I've seen reported since the new scenario pack came out, that has nothing to do with our products. That is either the route or the scenarios.
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2722
Joined: Tue Nov 29, 2011 1:46 am

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby buzz456 » Wed Feb 05, 2020 9:55 am

I have run these and haven't had a issue. You need to tell us more about the problem if we are to try to assist.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20902
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby ElphabaWS » Wed Feb 05, 2020 10:24 am

BNSFdude wrote:If it's signals being red or other things I've seen reported since the new scenario pack came out, that has nothing to do with our products. That is either the route or the scenarios.

Let me respond to this with some information, rather than what BNSFdude “has seen reported.”

- As with all High Iron Simulations scenario packs, all scenarios in this pack were tested to successful completion multiple times and by multiple individuals before release.

- Based on available user tracking data since release, we have not seen that any scenario is unplayable.

- We have, to-date, received two direct communications with users who have experienced a specific issue with red signals. These have been retested and the issue has not appeared in the retest. We all know that TS can, on occasion, produce unanticipated results on a user-by-user basis.

- If you are having issues with any of the scenarios, by all means please contact us directly at the address below.

- I cannot speak to the scenarios compatibility with Searchlight products.
User avatar
ElphabaWS
Global Mod
 
Posts: 511
Joined: Tue Mar 04, 2014 8:09 am

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby BNSFdude » Wed Feb 05, 2020 10:59 am

This is the first post I had seen if that's enough information for you. OP has not specified what the issue with his copy is yet though in this post.
Screenshot_20200205-095646_Facebook.jpg

Screenshot_20200205-095718_Facebook.jpg
You do not have the required permissions to view the files attached to this post.
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2722
Joined: Tue Nov 29, 2011 1:46 am

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby ElphabaWS » Wed Feb 05, 2020 11:36 am

The screenshot accompanying this post is directly from the present Steam-version release and shows no such "broken" issue as BNSFdude has illustrated (repeatedly) above.

Anomalies can and do occur across installs, and as stated in my earlier post, for anyone who has purchased a pack of ours and experiences a problem with a scenario, please contact us directly at the address below and will we make every effort to determine the cause.
You do not have the required permissions to view the files attached to this post.
User avatar
ElphabaWS
Global Mod
 
Posts: 511
Joined: Tue Mar 04, 2014 8:09 am

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby qwhite451 » Wed Feb 05, 2020 3:55 pm

Just an update 2 minutes worth of tinkering i solved the issue i was having i unzipped the ap file into the scenario folder itself and all the scenarios work without a hitch and i can use the enhancement pack with no problems.. the issue i was having before hand was after applying the enhancement the destinatiion feature on the hud would be blank.. it was sorta a weird issue but it was also the first time i ever ran into that kinda issue .
qwhite451
 
Posts: 61
Joined: Thu Dec 05, 2013 5:55 pm

Re: Problem with Searchlight Simulation and High Iron Simulations

Unread postby ElphabaWS » Wed Feb 05, 2020 4:29 pm

qwhite451 wrote:Just an update 2 minutes worth of tinkering i solved the issue i was having i unzipped the ap file into the scenario folder itself and all the scenarios work without a hitch and i can use the enhancement pack with no problems.. the issue i was having before hand was after applying the enhancement the destinatiion feature on the hud would be blank.. it was sorta a weird issue but it was also the first time i ever ran into that kinda issue .

Great to hear, and thanks very much for clarifying the issue. And thanks, too, for using the Montana Hi-Line Scenario Pack!!
User avatar
ElphabaWS
Global Mod
 
Posts: 511
Joined: Tue Mar 04, 2014 8:09 am


Return to Problems and Peculiarities

Who is online

Users browsing this forum: No registered users and 1 guest

cron