Railworks America

On the Clear Cut scenario when it comes time to move the GP38, after starting it, it says you have to get the brake pressure above 79 psi by throttling up. I have done so and the pressure looks to be over 79 psi, but it won't acknowledge I have accomplished the task. It just sits there waiting for me to complete the task. So I'm stuck with a scenario I can't complete.

Has anybody ever had any problems completing this particular task? I'm very frustrated and any help would be nice.

Thanks.

This is from a partial repost from the TSW Steam forums. "you have to set the throttle to about 2 and then move the automatic brake back and forth really slow to let off enough pressure to set the needle on the gauge at about 80psi."

This worked!

Although I didn't need to go back and forth on the brake. I simply step by step slowly released it until it worked. This is something they should fix. We shouldn't have to do a bunch of shot in the dark, trial and error moves in hopes of completing scenarios. It should have said we need it at exactly 80psi and not simply anything above 79psi.

This is DTG. Couldda, shudda, wouldda.