few questions

[aksingha]

Hi,
I have started building a route and have laid 3 km of track. But i have moved the marker a bit away from its original position. So, my question is will the DEM data be generated correctly when i import it the next time, since the marker denotes the originating point i.e latitude and longitude.

Also i am having some problems with my track junction. It does not happen always, but sometime it does and i have no idea, why.

[Chacal]

There was a discussion about this problem recently.
Krellnut provided a solution:

I've noticed there are quite alot of blocked frogs on crossovers. If your interested in fixing them, here's how; select the split tool and run the yellow arrow along the length of the crossover. If you can see the red triangle in the middle, split it there. If you don't see an triangle, the arrow should stick somewhere in the middle. Once split, more than likely you 'll see one track on either side of the split that is short. Click on it, delete it, then click the undo button. Weld the track together and the frogs will be repaired.

[aksingha]

Thanks a lot Chacal, now it is fixed

Do you have any idea about the DEM question, that i asked