Union Pacific GP40 Phase 2 Out on 11/30/17

Support for RRMods for Railworks products.

Moderator: RRMods

Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BNSF650 » Wed Nov 29, 2017 2:30 pm

From RRMODS Facebook Page.


Railworks users! We're are very proud to announce the release date of the Phase II GP40-2s will be November 30th at 11:30pm CST! The pack will come with 3 separate skins. We'd also like to once again thank Searchlight Simulations for all of their help. Here are some screens to hold ya over until Thursday night!

This will include:
3 LODs
Highly detailed exterior model
Accurate and detailed cab model
Animated cab doors
Animated windows
Animated Radio
Animated Air Conditioner
Animated Heater
Operating Distance Counter
Operating EOTT device
Animated Exterior Bell
Accurate sounds
Fading lights
Accurate step lights
Realistic smoke effect based on engine temperature
Realistic Dynamic Brakes / Air Brakes
Night lighting
Accurate physics


24174547_1505281166219479_9060705319249749257_n.jpg
You do not have the required permissions to view the files attached to this post.
Image
New Era of Train Simulation
User avatar
BNSF650
 
Posts: 2017
Joined: Mon May 31, 2010 10:27 pm
Location: Texas

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby ex-railwayman » Wed Nov 29, 2017 4:10 pm

3 Separate skins, are they all Union Pacific???

Are these being sold through their website Erik, do you know please, for us that don't have Facebook?

Cheerz. Steve.
i7 10700k 3.8GHz Eight Core CPU, Gigabyte Z590 AORUS ELITE AX, 32GB RAM, nVidia RTX3060ti 8GB, WIN10 PRO 64-bit. 10TB HDDs in total.
ex-railwayman
 
Posts: 1203
Joined: Tue Jun 22, 2010 6:17 pm
Location: Nottingham, England

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby GenericZack » Wed Nov 29, 2017 4:29 pm

Its all union pacific skins.

The only thing about this unit that i dont like is that the unit cant be run as a DPU because of the scripting.
Da Build: Intel Core I5-9600k, Nvida RTX 2060 Super, 32 GB ram, and way too much storage.
User avatar
GenericZack
 
Posts: 455
Joined: Thu Jun 02, 2016 5:21 pm
Location: California

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BNSFdude » Wed Nov 29, 2017 4:50 pm

GenericZack wrote:Its all union pacific skins.

The only thing about this unit that i dont like is that the unit cant be run as a DPU because of the scripting.

You won't find a real GP40-2 capable of DPU, either.
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2722
Joined: Tue Nov 29, 2011 1:46 am

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BNSF650 » Wed Nov 29, 2017 4:51 pm

ex-railwayman wrote:3 Separate skins, are they all Union Pacific???

Are these being sold through their website Erik, do you know please, for us that don't have Facebook?

Cheerz. Steve.


Yes i am sure on there website. I will let you know.
Image
New Era of Train Simulation
User avatar
BNSF650
 
Posts: 2017
Joined: Mon May 31, 2010 10:27 pm
Location: Texas

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby buzz456 » Wed Nov 29, 2017 5:04 pm

Here is their regular home page. http://www.rrmods.us/
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20857
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby ex-railwayman » Wed Nov 29, 2017 7:35 pm

I will have to go out busking again, save me a copy....... !*roll-laugh*!

Cheerz. Steve.
i7 10700k 3.8GHz Eight Core CPU, Gigabyte Z590 AORUS ELITE AX, 32GB RAM, nVidia RTX3060ti 8GB, WIN10 PRO 64-bit. 10TB HDDs in total.
ex-railwayman
 
Posts: 1203
Joined: Tue Jun 22, 2010 6:17 pm
Location: Nottingham, England

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BNSFdude » Wed Nov 29, 2017 7:42 pm

Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2722
Joined: Tue Nov 29, 2011 1:46 am

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby ENR3005 » Wed Nov 29, 2017 8:23 pm

BNSFdude wrote:
GenericZack wrote:Its all union pacific skins.

The only thing about this unit that i dont like is that the unit cant be run as a DPU because of the scripting.

You won't find a real GP40-2 capable of DPU, either.


I remember having read somewhere in some magazine article long ago that SP had a handful of GP40-2s setup with Locotrol as both receiver and masters, the only equipped in this way given the number of GP40-2s built. Not sure where they would be used though, perhaps some of the tight radius lines out West or perhaps branch-lines that were still putting out decent tonnage for SP that SD's couldn't go. Nice work on these units, looking forward to using them.
ENR3005
 
Posts: 218
Joined: Fri Mar 19, 2010 11:50 pm

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BNSFdude » Wed Nov 29, 2017 8:49 pm

ENR3005 wrote:I remember having read somewhere in some magazine article long ago that SP had a handful of GP40-2s setup with Locotrol as both receiver and masters, the only equipped in this way given the number of GP40-2s built. Not sure where they would be used though, perhaps some of the tight radius lines out West or perhaps branch-lines that were still putting out decent tonnage for SP that SD's couldn't go. Nice work on these units, looking forward to using them.

Ah, that would be the GP40Xs if I recall correctly.
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2722
Joined: Tue Nov 29, 2011 1:46 am

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BoostedFridge » Thu Nov 30, 2017 2:21 am

Setup and operation video are available on Youtube.

https://www.youtube.com/watch?v=plDhoJY2eUY

https://www.youtube.com/watch?v=qlknVEoHwOU

Nice work on the videos Anthony
User avatar
BoostedFridge
 
Posts: 2277
Joined: Sat Aug 24, 2013 6:39 am
Location: Vancouver, BC

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BoostedFridge » Fri Dec 01, 2017 12:30 am

User avatar
BoostedFridge
 
Posts: 2277
Joined: Sat Aug 24, 2013 6:39 am
Location: Vancouver, BC

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby NStrains » Fri Dec 01, 2017 5:18 pm

Did RRMods and Searchlight produce the TSW version that just came out as well? Just curious. !*cheers*!
User avatar
NStrains
 
Posts: 1367
Joined: Sun Nov 15, 2015 1:31 pm
Location: VA near the "B-Line"

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby BNSFdude » Fri Dec 01, 2017 5:20 pm

NStrains wrote:Did RRMods and Searchlight produce the TSW version that just came out as well? Just curious. !*cheers*!

No, you'll find ours is leagues ahead of the TSW one.
Anthony Wood
Audio Engineer - Searchlight Simulations
User avatar
BNSFdude
 
Posts: 2722
Joined: Tue Nov 29, 2011 1:46 am

Re: Union Pacific GP40 Phase 2 Out on 11/30/17

Unread postby NStrains » Fri Dec 01, 2017 5:36 pm

BNSFdude wrote:
NStrains wrote:Did RRMods and Searchlight produce the TSW version that just came out as well? Just curious. !*cheers*!

No, you'll find ours is leagues ahead of the TSW one.

Ok thanks for saving me some money there, that i will now spend on yours/RRMods version lol.
User avatar
NStrains
 
Posts: 1367
Joined: Sun Nov 15, 2015 1:31 pm
Location: VA near the "B-Line"

Next

Return to RRMods

Who is online

Users browsing this forum: No registered users and 8 guests

cron