Hi,
I keep finding scenarios, which reference the DTG GP38 DLC for both the engine and rolling stock. As this DLC can no longer be obtained by us aliens outside the USA, I use JC's version of the GP38. No problem, but cannot find suitable substitutes for the flatcars c/w steel pipes , steel coils etc. Can anyone point me to their equivalents elsewhere?
Regards JohnT
GP38-2 Rolling stock
First unread post • 6 posts
• Page 1 of 1
GP38-2 Rolling stock
by JohnT » Fri May 13, 2016 6:02 am
- JohnT
- Posts: 122
- Joined: Sun Feb 22, 2015 9:37 pm
Re: GP38-2 Rolling stock
by buzz456 » Fri May 13, 2016 7:41 am
Have you looked on Golden Age of Rails page? He has a huge choice of rolling stock.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20918
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: GP38-2 Rolling stock
by JohnT » Fri May 13, 2016 10:29 am
Doh,
thanks for reminding me. Just checked my T&D payware folder, and yes,there they where. Modern freight, c/w pipes/steel etc.
Now to see if its possible to substitute using RWTools and loading them with the right materials.
Regards JohnT
thanks for reminding me. Just checked my T&D payware folder, and yes,there they where. Modern freight, c/w pipes/steel etc.
Now to see if its possible to substitute using RWTools and loading them with the right materials.
Regards JohnT
- JohnT
- Posts: 122
- Joined: Sun Feb 22, 2015 9:37 pm
Re: GP38-2 Rolling stock
by JohnT » Fri May 13, 2016 6:15 pm
Funny how one thing leads to another.
Having found the T&D Modern freight DLC. I checked and spotted it came with bundled scenarios. So I tried the one that was placed into the Cajon Route, namely ". Modern Freight Cajon Pass Helper" This scenario started with you placed in SD40-2 loco which you had to attach to the back of a waiting consist. Having done that you then had to enter the lead loco ES44ac and drive the consist to Cajon Pass summit. Whereupon you then detach SD40-2 and bring them back to San Bernadino.
Now to the problem the lead locos involved are Kuju\RailsimulatorUS\railvehicles\diesel\es44ac\def2 & default and the problem is neither the horn or bell work from either the HUD or [Space] / [B]. and the cab light switch is inoperable.
Any thoughts ?
Regards JohnT
Having found the T&D Modern freight DLC. I checked and spotted it came with bundled scenarios. So I tried the one that was placed into the Cajon Route, namely ". Modern Freight Cajon Pass Helper" This scenario started with you placed in SD40-2 loco which you had to attach to the back of a waiting consist. Having done that you then had to enter the lead loco ES44ac and drive the consist to Cajon Pass summit. Whereupon you then detach SD40-2 and bring them back to San Bernadino.
Now to the problem the lead locos involved are Kuju\RailsimulatorUS\railvehicles\diesel\es44ac\def2 & default and the problem is neither the horn or bell work from either the HUD or [Space] / [B]. and the cab light switch is inoperable.
Any thoughts ?
Regards JohnT
- JohnT
- Posts: 122
- Joined: Sun Feb 22, 2015 9:37 pm
Re: GP38-2 Rolling stock
by trev123 » Sat May 14, 2016 12:53 am
John if you have Stevens Pass you should have the BNSF GP38-2.
Last edited by trev123 on Sat May 14, 2016 4:09 pm, edited 1 time in total.
Intel i5-10600K CPU, Asus TUF GAMING Z490-Plus (Wi-Fi) MB, Graphics Asus RTX 3060 TI 8GB OC TUF gaming card Windows 11 Home 64 bit, 16 GB Corsair Vengeance DDR4 ram, Viewsonic VX2728 LED 1080P FHD Monitor, Samsung 1TB SSD + other conventional drives, Corsair 750W PSU.
-
trev123 - Posts: 2320
- Joined: Mon May 19, 2014 9:40 pm
- Location: Home Of The Americas Cup
Re: GP38-2 Rolling stock
by JohnT » Sat May 14, 2016 5:32 am
Doh,
yet again, looked in all the usual places RSC/DTG/S9BL/RSDL never thought of there.
Got so much stuff, confusion reigns supreme at my age.
Not been a total waste of time though, as being made to look at the Gt Northener Modern Freight which I already had. Paid dividends, didn't remem how good that stuff was.
So to you and Buzz, thanks for the pointers and jogging my memory.
As for the ES44ac problem, will try a few swaps to-day, seeing as I have quite a few options available.
Regards JohnT
yet again, looked in all the usual places RSC/DTG/S9BL/RSDL never thought of there.
Got so much stuff, confusion reigns supreme at my age.
Not been a total waste of time though, as being made to look at the Gt Northener Modern Freight which I already had. Paid dividends, didn't remem how good that stuff was.
So to you and Buzz, thanks for the pointers and jogging my memory.
As for the ES44ac problem, will try a few swaps to-day, seeing as I have quite a few options available.
Regards JohnT
- JohnT
- Posts: 122
- Joined: Sun Feb 22, 2015 9:37 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests