In Quick Drive, there's a consist "ConrailBFT.bin" using the Conrail U30C which has two engineers.
How can I add an engineer to the various Santa Fe U28CG models?
Thanks,
Rob
How Do I Add An Engineer?
Moderator: MadMike1024
First unread post • 5 posts
• Page 1 of 1
How Do I Add An Engineer?
by FHRob » Mon Dec 21, 2015 6:00 pm
Contrary to most DLC, the U28CG, unlike the Conrail U30C, defaults to no engineer/driver.
In Quick Drive, there's a consist "ConrailBFT.bin" using the Conrail U30C which has two engineers.
How can I add an engineer to the various Santa Fe U28CG models?
Thanks,
Rob
In Quick Drive, there's a consist "ConrailBFT.bin" using the Conrail U30C which has two engineers.
How can I add an engineer to the various Santa Fe U28CG models?
Thanks,
Rob
Last edited by FHRob on Mon Dec 21, 2015 7:12 pm, edited 1 time in total.
- FHRob
- Posts: 370
- Joined: Wed Jul 02, 2014 11:06 am
Re: How Do I Add An Engineer?
by OldProf » Mon Dec 21, 2015 6:31 pm
I'm not familiar with this particular engine, but typically some engines come in various configurations, such as XXX, the engine with a driver, and XXXND, same engine without a driver. In your case, XXX2D should be an option available in the assets>engines fly-out. Take a look. You might also consult the users' manual (you know, the PDF file clearly labeled "Don't even think of opening this!"?) for information about using the engine in your own scenarios. I'll admit that some manuals lack this essential information, however.
Tom Pallen (Old Prof)
{Win 10 Home 64-bit; Intel Core i7 6700 @ 3.40GHz; 16.0GB Single-Channel @ 1063 MHz (15-15-15-364); 2047MB NVIDIA GeForce GTX 960}
{Win 10 Home 64-bit; Intel Core i7 6700 @ 3.40GHz; 16.0GB Single-Channel @ 1063 MHz (15-15-15-364); 2047MB NVIDIA GeForce GTX 960}
-
OldProf - Posts: 2755
- Joined: Wed Sep 09, 2009 10:09 am
Re: How Do I Add An Engineer?
by buzz456 » Mon Dec 21, 2015 7:22 pm
The bin files need to be changed to include the engineer. The Conrail version includes one. If you don't how to do this I can send you some new bins. That will leave you with all the engines having engineers.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20901
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: How Do I Add An Engineer?
by buzz456 » Mon Dec 21, 2015 7:29 pm
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20901
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: How Do I Add An Engineer?
by FHRob » Mon Dec 21, 2015 9:06 pm
buzz456 wrote:The bin files need to be changed to include the engineer. The Conrail version includes one. If you don't how to do this I can send you some new bins. That will leave you with all the engines having engineers.
If you can send me the new bin files, would be appreciated.
Rob
- FHRob
- Posts: 370
- Joined: Wed Jul 02, 2014 11:06 am
5 posts
• Page 1 of 1
Return to Virtual Rail Creations
Who is online
Users browsing this forum: No registered users and 1 guest