SEATTLE SUBDIVISION TO TACOMA RELEASED!

[razorwyre]

i down loaded the whole route myself, but was waiting/hoping someone else has posted any comments about it before i purchase it, but i read your post and you mention how well it ran, and no issues with it, so now im gonna purchase it,,, as far as the BN sd60m that will be released with phase 2 of this route as i am to understand its mentioned somewhere in the forums in regards to this route. as far as some of the missing stock, use RWtools to replace whats not there, if you cannot locate them

[eyein12]

I recently bought version 1 of this route and was able to run it end to end in a free roam scenario and it is very well done, with tons of operating potential. I've been trying to run some of the included scenarios and have been slowly tracking down the extra content needed, however, I can't find a covered hopper called BNSF1. I've found BNSF2, 3, and 4 in a repaint pack by Jessie James but haven't been able to find the first one. Also, wasn't there a BN SD60M that came with it? I haven't been able to locate that either. Thanks!

the sd60m is to be released with the 2nd phase or something along those lines.

[razorwyre]

well bought the route, installed it, started ts2013 hoping to play the route, but to no avail. i got a SBHH... so im not sure what the deal is atm, gonna check the route with RWtools to see what im missing

[eyein12]

delete PONtrack.bin from your railworks folder. do a search for it.

[buzz456]

Make sure you do a COMPLETE search. I had it in five places.

[razorwyre]

yeah just finished that found the files deleted them, ran ts2013 and still nothing, so im not sure what the deal is, i have no other issue running any other routes, i have a good rig, dont have any other issues, with any of his other stuff

[buzz456]

Have you read Bob Latimer's tutorial on getting third party routes to run? I assume you have RWTools. Do what he says. It fixes almost everything. I know the route is OK.

http://railworksamerica.com/index.php/l ... -in-ts2013

[Chacal]

Also try running TS2014 with Logmate.
You'll find instructions in the forums.
The log should have some clue as to what's happening.

[razorwyre]

All is well now, Eyein12, awesome job, as always.. looking forward to phase 2, how close are you to that being released.

[eyein12]

some more progress. I need to fix the interior of the yard shed. this is all the Tacoma bay area. the Tacoma dome station etc.

2014-01-04_00004.jpg

2014-01-04_00003.jpg

2014-01-04_00002.jpg

2014-01-04_00001.jpg

2013-11-12_00002.jpg

[eyein12]

2014-01-04_00009.jpg

2014-01-04_00008.jpg

2014-01-04_00007.jpg

2014-01-04_00006.jpg

2014-01-04_00005.jpg

[eyein12]

one more...of the Tacoma dome station.

2014-01-04_00010.jpg

[buzz456]

[imnew]

Fantastic work ! Love all them custom made buildings

[eyein12]

2014-01-04_00012.jpg

fixed the interior now. it is pre-lit at night and I still have to add in the light fixtures but the fx are there.

this is the Tacoma rail company loco repair shed area. I plan on doing a Tacoma rail expansion pack for this route in the near future. The pack may include some if not all: sd40, gp40-M, gp22eco, a genset switcher. I may just put the sd80mac on hold so that I can build up this expansion pack after I release the seattle route. The route will come with its own starter kit rolling stock such as A bnsf C40-8W, articulated MAXI III well cars in BNSF livery and a 4 bay grain car possibly more(ie the sd60M in UP and BNSF). Mike durdan is helping on the rolling stock aspect as I scramble to finish the building aspect of the route. The route is massive in the Tacoma area and not trying to get at least 1/2 of the buildings accurate would do the area a great injustice.

Im looking to aim for a mid February-early March roll out and that's a firm start date . I have figured out the best way to handle the situation where people who bought part 1 wont be burnt by me rolling this part out. I will announce that closer to release time.

Ian