Crossing Bell Change

[FoodMonsterGuy]

Is it possible to change the bell sounds on default crossings?(Kuju, Sherman Hill, etc) Can't find audio folders for them.

[RailfanKyle]

Is it possible to change the bell sounds on default crossings?(Kuju, Sherman Hill, etc) Can't find audio folders for them.

Idk I only know how to do the SMM's sounds, there must be a way to do it

[buzz456]

Is it possible to change the bell sounds on default crossings?(Kuju, Sherman Hill, etc) Can't find audio folders for them.

Idk I only know how to do the SMM's sounds, there must be a way to do it

I mean this seriously not trying to be a wise guy. Do you know how to read the bin file? It will tell you where the sound is coming from I believe.

[RailfanKyle]

Is it possible to change the bell sounds on default crossings?(Kuju, Sherman Hill, etc) Can't find audio folders for them.

Idk I only know how to do the SMM's sounds, there must be a way to do it

I mean this seriously not trying to be a wise guy. Do you know how to read the bin file? It will tell you where the sound is coming from I believe.

I do doesn't tell me anything

[buzz456]

How can it have sound if it isn't told anything?

[RailfanKyle]

How can it have sound if it isn't told anything?

Idk, you don't know how many times I looked through the Bin files,

[buzz456]

Am I missing something here? I looked at the Kuju files and when I couldn't find anything I went and cranked up Cajon Pass and there does not appear to be any sound on the signals. So in other words there is no sound to modify. Am I wrong?

[bnsfsubdivision]

Am I missing something here? I looked at the Kuju files and when I couldn't find anything I went and cranked up Cajon Pass and there does not appear to be any sound on the signals. So in other words there is no sound to modify. Am I wrong?

RailSimulatorUS\Audio\Ambient\US\Point\Amb_P_US_LevelCrossing.dav

[RailfanKyle]

Am I missing something here? I looked at the Kuju files and when I couldn't find anything I went and cranked up Cajon Pass and there does not appear to be any sound on the signals. So in other words there is no sound to modify. Am I wrong?

RailSimulatorUS\Audio\Ambient\US\Point\Amb_P_US_LevelCrossing.dav

Ummmmm Buzz are you not finding the Ambient file in your file

[buzz456]

I did find it. Now all I have to do is figure out why it's not working. However that does answer the question first posed here kinda.

[RailfanKyle]

I did find it. Now all I have to do is figure out why it's not working. However that does answer the question first posed here kinda.

Same here

[FoodMonsterGuy]

Now I see. I should have looked further.

[BNEdward]

The old cajon crossing had a ambient crossing sound placed. most newer routes have a sound aliased to the crossing.

Taken straight from bin/xml
<Name d:type="cDeltaString">Crossing Bell</Name>
<IsLooped d:type="bool">1</IsLooped>
<Priority d:type="sUInt32">50</Priority>
<BaseVolume d:type="sFloat32">1</BaseVolume>
<VolumeVariation d:type="sFloat32">0</VolumeVariation>
<BasePitchShift d:type="sFloat32">1</BasePitchShift>
<PitchShiftVariation d:type="sFloat32">0</PitchShiftVariation>
<AttenuationStartDist d:type="sFloat32">7220</AttenuationStartDist>
<NoFutherAttenuationDist d:type="sFloat32">7225</NoFutherAttenuationDist>
<InstanceGroup d:type="ref">0</InstanceGroup>
<Sample>
<kLoud-cSampleID>
<Filename d:type="cDeltaString">DTG\Miami\Audio\Ambient\US\Point\Amb_P_US_LevelCrossing.dav</Filename>