Trains and Drivers Volume 2 - Horseshoe Curve

Announcements and Discussion about Trains-and-Drivers.net Development

Trains and Drivers Volume 2 - Horseshoe Curve

Unread postby Andimax » Sun Oct 16, 2011 3:04 pm

Trains and Drivers Volume 2 - The Horseshoe Curve in the 1950s and 1960s out now! This Addon brings the swinging 1950s and 1960s to your Simulator. Get ready for some shunting jobs with your GP-7, or drive a passenger service down the Horseshoe Curve and enjoy the wonderful scenery of this Apalachian Mountain Route! Hours of driving and some real exciting scenarios await you! No extra downloads required!


As always available directly from our OnlineStore! (http://trains-and-drivers.net) *!!wink!!*

TaD Volume 2.jpg



The Scenarios:

TaD Volume 2 - 1: Build consist for Bethlehem Steel: You will be building your consist for the mornings run to Bethlehem Steel. You will be collecting the smaller segments from around Altoona Yard and placing them on the Test Shed Siding 2 for the next mornings run.

TaD Volume 2 - 2: Morning run for Bethlehem Steel: You must add your consist to the back of your engines before heading west to Bethlehem Steel. Once you get there you must Break down the consist onto 3 different sidings. Then park your engine on Johnstown Siding 1 to end the scenario.
TaD_Volume_2_Part_5a.jpg


TaD Volume 2 - 3: Passenger service to Johnstown: You are taking the morning Passenger run to Johnston. It is a cold winter morning with a bad snow storm in full bloom. Take it easy and keep the passengers safe and warm. There are no expected delays, but you know how fast things can change. Good Luck!

TaD Volume 2 - 4: Working Cresson Yard Part 1:
Your job today is to break down the consists and sort them to there perspective sidings. They will all be sorted by type cargo they carry.

TaD Volume 2 - 5: Working Cresson Yard Part 2: You finish up the yard work in this part by taking the remaining consist to its final destination. Then park your engines on Johnstown Siding 1.

TaD Volume 2 - 6: Johnstown Switching Part 1: You wil be swapping out the full cars with the empty ones and making a consist to be taken to Altoona In the next segment.

TaD Volume 2 - 7: Johnstown Switching Part 2: Your task today is to take the consist you built earlier to Altoona. Should be a nice uneventful trip through the curve.

TaD Volume 2 - 8: Picardi Gravel Yard: OK! Today you will be on your own. You will be taking all the gravel cars on Picardi Gravel 2 and 3, plus the Boxcars on 4. Once you have them you will drop them off on C Storage 2. Then return to Woodvale Yard 17 where the journey will end. Good Luck Driver.

TaD_Volume_2_Part_3.jpg
You do not have the required permissions to view the files attached to this post.
Greetings from the old world!
Andreas
User avatar
Andimax
 
Posts: 268
Joined: Wed Jan 19, 2011 11:00 am
Location: Koblenz, Germany

Re: Trains and Drivers Volume 2 - Horseshoe Curve

Unread postby dick8299 » Sun Oct 16, 2011 3:17 pm

I strongly recommend that you provide an English version of your web site for placing orders. I will not consider ordering until then.
User avatar
dick8299
 
Posts: 385
Joined: Sat Feb 28, 2009 7:50 am

Re: Trains and Drivers Volume 2 - Horseshoe Curve

Unread postby Andimax » Sun Oct 16, 2011 3:27 pm

Just click on the Union Jack in the left upper corner ... *!!wink!!* -->Online Store

Just click on the language selecto in the left menu -->website
Greetings from the old world!
Andreas
User avatar
Andimax
 
Posts: 268
Joined: Wed Jan 19, 2011 11:00 am
Location: Koblenz, Germany

Re: Trains and Drivers Volume 2 - Horseshoe Curve

Unread postby dick8299 » Sun Oct 16, 2011 4:44 pm

Got it now, thanks.
User avatar
dick8299
 
Posts: 385
Joined: Sat Feb 28, 2009 7:50 am

Re: Trains and Drivers Volume 2 - Horseshoe Curve

Unread postby dcushing » Mon Oct 17, 2011 7:11 pm

I would love to purchase the new Horseshoe Curve scenario set but your website refuses to accept my registered password. I have the NEC set, and your front page accepts me, but when I go to the store it will not let me sign in. Is your site functioning properly?

Duncan Cushing
dcushing
 
Posts: 296
Joined: Sat Nov 20, 2010 8:08 pm

Re: Trains and Drivers Volume 2 - Horseshoe Curve

Unread postby Samwolf » Tue Oct 18, 2011 7:17 am

Happened to me too earlier. They changed their store after the initial Packs came out. You need to re-register at the new store.
If God had intended for man to fly, He wouldn't have given us the railroads.
User avatar
Samwolf
 
Posts: 762
Joined: Mon Aug 30, 2010 6:57 pm
Location: South Carolina, CSA

Re: Trains and Drivers Volume 2 - Horseshoe Curve

Unread postby Andimax » Tue Oct 18, 2011 2:57 pm

Yes, that´s the way it is: The shop and the website are two different things. We are not happy with that either, but we started with the website and a "Paypal-Button" on it !*roll-laugh*! ! Every order was processed manually. But as orders got more, it was not possible to handle them !DUH! , so we changed to the new store. :D

It is much easier now, for both sides. But we will keep the old Download Section online. :D
Greetings from the old world!
Andreas
User avatar
Andimax
 
Posts: 268
Joined: Wed Jan 19, 2011 11:00 am
Location: Koblenz, Germany


Return to Trains and Drivers

Who is online

Users browsing this forum: No registered users and 1 guest