US Bath to Templecomb

[Csxgp38-2]

My latest project, using all default and HSC assets with SMM signals, completely rebuilding this favorite UK route in an Eastern American setting in the 1950s. I'm not just changing some signals either, the line has been single tracked, the track left the same except US buffers added, stations completely rebuilt with HSC station buildings, lamps, and platforms. Roads have been replaced with freeware scaleroad roads, US road signs added, US interlocking towers and crossing signals added, and lowering whole sections of road, track, and scenery to remove hundreds of bridges on the route where a grade crossing would be put in the US, this means flattening the incline area around the bridge also. The track being up higher than the surrounding landscape? Not prototypical to the US, therefore much of the track and scenery is being lowered to the same level.
The Britkits PRR cars mixed with HSC P70s and a sharp looking F unit certainly fit right in on this '50s route!:

[NDORFN]

How are the SMM signals going? Hoping to use the Safe Tran signals on my route this week but according to the readme they're not fully developed.

[Csxgp38-2]

The searchlights work pretty good, there's 2 I need to look at, they both show red with the signal after them green... there are no switches in between the two signals, I'll have to replace them and check again.