V&TRR 2-6-0 Mogul

[Logan20131]

The pilot wheel could be lifted by half an inch to meet the rail top instead of cutting into it...

[CArailroader]

The pilot wheel could be lifted by half an inch to meet the rail top instead of cutting into it...

Picky picky picky.... PM function, useful for these sorts of suggestions.

[Logan20131]

Sorry, I'll admit that I'm a rivet counter.

[GenericZack]

Sorry, I'll admit that I'm a rivet counter.

Plz dont thank you.

On the other hand, the locomotive is looking great!

[buzz456]

Sorry, I'll admit that I'm a rivet counter.

Please stop. It annoys near everyone. I guess I was too subtle when I called you Mike the other day. It didn't end well for him.

[GutoNicolucci]

Well, since that was quoted I'll say what happens there on the pilot: Nothing is sunk on the rail, what happened there was a slight flaw in the position of the pivotal axis of the trick. It is corrected in 3D by returning to zero pivot. And then exported again, all over again...

I think I can put a video of her later so they can see it lit for the first time on Railworks!

[GutoNicolucci]

Guys, I consider the first version of Mogul finalized. Smoke and whistle

As I said before, the model has some details that during the export may have gone blank, the process is quite annoying and since I am not a professional, I hope to improve ... All sounds are default to Black 5 except the whistle, the bell is not working! The Black 5 files are .LUA, if they were InputMappers it would be more practical for me. At least the whistle is authentic.

Below is a quick video of a slow passage of the locomotive already ready ... I will program from now for permission of the author of the model and later, it will be posted here in RWA.



I want to thank all of the employees of this small project:

Daniel Gollery - author of the model and textures
Fernando Oliveira - help me with .bin and .xml files
Darlan Gomes - 3Ds animation and export blueprint help
Jonas Martins - help with locomotive specifications

[Logan20131]

Congrats! Love it! Hope to be able to run it in a few scenes I'm working on before my Drawings show up.

[BNSFdude]

Remove the s from the http link and your youtube embed should work.

[trainboi1]

Hi all,
Guto was kind enough to send me this a bit ago:

I'm pleased with how it turned out - certainly he's gotten farther in exporting locomotives than I ever did - but there is one texture error I'm going to try to work with him to fix, and operationally there's a few things I'm going to try to mess with, particularly as I can use recordings from Inyo and Glenbrook to make her feel a bit more authentic. I'm also going to try and mix up some suitable rolling stock, probably including their 10-ton wooden ore wagons and the Brill coaches (the latter of which aren't going to be an exact fit for these as-built moguls, but they're all I have modeled currently). I look forward to seeing the finishing touches worked on this.

[GutoNicolucci]

Remove the s from the http link and your youtube embed should work.

Very thanks!

[ZekTheKid]

Guys, I consider the first version of Mogul finalized. Smoke and whistle

As I said before, the model has some details that during the export may have gone blank, the process is quite annoying and since I am not a professional, I hope to improve ... All sounds are default to Black 5 except the whistle, the bell is not working! The Black 5 files are .LUA, if they were InputMappers it would be more practical for me. At least the whistle is authentic.

Below is a quick video of a slow passage of the locomotive already ready ... I will program from now for permission of the author of the model and later, it will be posted here in RWA.



I want to thank all of the employees of this small project:

Daniel Gollery - author of the model and textures
Fernando Oliveira - help me with .bin and .xml files
Darlan Gomes - 3Ds animation and export blueprint help
Jonas Martins - help with locomotive specifications

If you don't mind me asking. What's that loco in the background?

[GutoNicolucci]

It's an original Trainz 12 N&W Y6b, I'm adapting it to work with Railworks specifications.

[Logan20131]

It's an original Trainz 12 N&W Y6b, I'm adapting it to work with Railworks specifications.

I sent you a PM.

[jpetersjr]

It's an original Trainz 12 N&W Y6b, I'm adapting it to work with Railworks specifications.