Page 1 of 1

Majestic Falls Gas Electric

Unread postPosted: Tue Oct 23, 2018 11:10 pm
by harryadkins
This model is a fictional Majestic Falls Railway reskin of Michael Stephan’s B&M Gas-Electric Doodlebug. I created the model for the freeware Majestic Falls route available on the Steam Workshop. The freeware base model is available here: http://www.stephan-michael.de/railsim/p ... dlebm.html .

While interest in self-propelled cars did exist before the late 1910s in the form of the electric trolley and streetcar as well as a few other examples, the better portion of doodlebug usage in the United States can be traced to this time period. Electro-Motive Corporation began the large scale production of self- propelled railcars using bodies manufactured by Pullman and the St. Louis Car Company. By the 1920s the gas-electric car had become one of the main providers of branch-line service.

Unzip and install using the included RW_AssetSetup.exe installer. In the scenario editor it is listed as: Doodlebug_MFRR.

Harry R. Adkins
October 2018

Re: Majestic Falls Gas Electric

Unread postPosted: Wed Oct 24, 2018 2:12 am
by CArailroader
This will look fantastic on my 40's rendition of Majestic Falls! Thank you for this awesome repaint!

Re: Majestic Falls Gas Electric

Unread postPosted: Wed Oct 24, 2018 9:14 pm
by harryadkins
Open to any other Majestic Falls rolling stock reskins you may need...

Harry

Re: Majestic Falls Gas Electric

Unread postPosted: Wed Oct 24, 2018 10:38 pm
by ZekTheKid
harryadkins wrote:Open to any other Majestic Falls rolling stock reskins you may need...

Harry

How about a reskin of the US Army S160 steam locomotive on steam?
Image
Not too big, and not too small. A workhorse that suites the Majestic Falls well in my eyes.

Re: Majestic Falls Gas Electric

Unread postPosted: Thu Oct 25, 2018 11:24 am
by harryadkins
Currently working on MFRR reskin of mrennie's Consolidation. Will look at the USATC 2-8-0 after that.

Harry

Re: Majestic Falls Gas Electric

Unread postPosted: Fri Oct 26, 2018 10:18 pm
by wopflyer
ZekTheKid wrote:
harryadkins wrote:Open to any other Majestic Falls rolling stock reskins you may need...

Harry

How about a reskin of the US Army S160 steam locomotive on steam?
Image
Not too big, and not too small. A workhorse that suites the Majestic Falls well in my eyes.



First off, good job on the gas-electric repaint. I'll be using this one for sure.

Secondly, I'd like to see the S160 repainted as well. I think it would be a good companion for the "Smokebox" Consolidation as his is more of lightweight and the S160 is more a heavyweight.

And third, I'd suggest the BritKits "Shay Class C", and the G-TraX BLE 0-6-0 for steam repaints. And the ALCO RS-1 (Either the G-TraX version or the one that comes with the RWA route.).

Thanks