Montana Rail Link

[AmericanSteam]

The ability to create is what makes TS what it is.

[Chacal]

Salut Zawal,
Comment peux-tu créer des routes d'une telle qualité aussi rapidement à partir de rien?
Es-tu un robot?

[zawal]

Salut Zawal,
Comment peux-tu créer des routes d'une telle qualité aussi rapidement à partir de rien?
Es-tu un robot?

Haha un extraterrestre peut-être ?

Tchou- tchou ......

20210829190537_1.jpg

The Devil's turn 15 milles H maxi .

20210829190651_1.jpg

20210829190706_1.jpg

A+

[zawal]

Hello

And There you go ...

It's over, as it is impossible to do a QD! (I don't know why TS does not accept QDs on this route.) and therefore impossible to put the route on the work shop, I give you my drive link here.

I strongly advise you to keep a copy in case my drive is emptied again.
In addition it will allow whoever requests it to be able to have the road part of one of you.

If Bruno wants it up on the site, no problem for me.

You only need the "CSX Hanover Subdivision" DLC and the Euro and US assets, nothing else is required.

The road is called "Devil's Turn" and you have two free roams provided with it.
One for each departure city.

I created this route to run in steam but you can also do it with a good old diesel of course.

I authorize you to share, modify, create scenarios ... etc etc
In short, it's yours now .

Link: https://drive.google.com/file/d/1xqL2Og ... sp=sharing

have fun

Zawal.


PS: I don't upload it anywhere other than here at your place on Railworks America.

[sirrliv]

I can't tell you how good it is to have you back, Zawal.

And just seeing how fast such a wonderful looking route came together in your capable hands proves what a true maestro you are. I can only pray that someday I'll be halfway good enough for you to even deign my work to be a piece of crap.

I'm sorry to hear about QD setup not working, that is very strange. But TS is a fickle mistress; I've seen Workshop eligible routes with nothing but manual points, which you'd think QD wouldn't like at all. There's one route I know of, Clover Valley, where the one and only QD starts you out facing the wrong way! How is that even possible?!

Regardless, I do hope you're home to stay. Rest assured you have plenty of allies here. And if you have any interest in Discord, maybe look into Golden Age Developments, a mostly British-based group that is a special haven for creative TS lovers. I'm a member there myself and friends with a couple of the moderators, so I feel confident in saying you'll be safe and welcome there.

[RudiJaeger]

Devils Turn__01.jpg

Devils Turn__03.jpg

Devils Turn__02.jpg

Zawal, I've not had much time lately to run TS, but when I saw your latest creation announced, I just had to try it. What an enjoyable route! I think you must have had fun with this one; aside from your usual artistry with the scenery, I especially enjoyed running through the compound super-elevated curves. This is definitely another one of your classic works.
Thank you very much for sharing this with us.

[Chacal]

Awesome. I'll put it soon in the file library.
Maybe our various experts can do something about the QD?

[zawal]

Thank you it's a pleasure.

For the QDs I tore my hair yesterday and nothing to do, at home it does not work !.
He tells me that he cannot find the path or that the rail is not on the right side or even that the electrification is not good !!!
Unbelievable, the road is not electrified anyway.
Everything is ok in the rules of the way, I really can't see.

I had the same problem with another route that I did last month in Austria (middle mountain), I had managed to tweak a "rotten" QD to be able to put it on my steam workshop.
Besides, it is still there, it is also a small road of 20 km with a very very detailed "special" Winters mod.
here is the link of my steam workshop: https://steamcommunity.com/profiles/765 ... ppid=24010

There are a few routes that I did quite a while ago.
For the UP on the site, no problems for me, especially since the file is very small!

After a big year without working on TS I must say that I had a lot of fun on this new road and the desire to do another one comes very quickly too!

In the meantime, I "emptied" the "Machine Rail" store, I bought all of its beautiful steam locomotives.

So as I have the Clear Creek and the two DLC that go with it (yes I have a lot of US things), I will do a little log or coal loading trick with the "narow gauges".

I thought that something 4 or 5 miles with several branches should be fun to do.

Here too I will only use official DLC for ease of installation.

Anyway, I'm going to see this, I'm going to study some vintage screens, I already have a little idea of ​​what I can do.

A small road tied in narow gauge somewhere at the end of the USA in 1890 ....

Yep, there's a way.

For my account here, no worries to have, it is the one and only forum where I am still registered, I closed all my other accounts.

Even if I don't participate very often, I like to come here to see the comu screens, the WIP and other stuff every day.

A +

[demandred88q]

Hello Zawal,

I have seen instances of QDs not working where rail direction is incorrect somewhere along the path (there are a couple of places in the Triangle du Cantal that have this problem), but it's not always obvious.

I would love to try your latest route when I have the pre-requisites.

Cordialement.

[buzz456]

I believe to get a QD to work you need to set up a Asset folder with some route markers in it. I just loaded the route for the first time and when I went into the world editor I didn't see any markers listed. Do you have such a folder and just didn't include it in the upload or does one need to be created?

[Schnauzahpowahz]

20210831121224_1.jpg

20210831121440_1.jpg

20210831121122_1.jpg

20210831112148_1.jpg

20210831111318_1.jpg

Excellent rte Zawal.

[zawal]

I believe to get a QD to work you need to set up a Asset folder with some route markers in it. I just loaded the route for the first time and when I went into the world editor I didn't see any markers listed. Do you have such a folder and just didn't include it in the upload or does one need to be created?

No I don't have that kind of thing!

In principle there are no problems for the QDs but on this road I always find a few things wrong.

I'm starting a new 1-way project too, I'll see if the QDs will work or not.

My TS is brand new, I reinstalled it 2 weeks ago and I have no unofficial assets.
I only have DLC from DTG or professional creators, nothing "free".
i did a file check and everything is ok.


I know TS has trouble with QDs on 1-lane roads, especially because of the signage.
Finally, perhaps it is the signage that is wrong?
I'm not very familiar with it so it is quite possible that I put it wrong and suddenly the QDs don't work?!?

In short, it is not very serious, the main thing is to please.

[buzz456]

I made a QD for the MRL Huntley to Bozeman. Let me see what I can do to make one.

[DieselMatt75]

This is an amazing route. The minute I saw it it was in my Railworks game. Anyways, outstanding job!

[zawal]

This is an amazing route. The minute I saw it it was in my Railworks game. Anyways, outstanding job!

Thank you, you will also like the next one I think ....