Is it just me???

Post your problems and installation issues here!

Is it just me???

Unread postby bwfer » Fri Nov 23, 2012 6:41 pm

I have both versions of the Big Boy and Challenger. The issue I have with both of these Addons is there is no steam emissions from the turbo generator, pop valves, injectors etc. On the BB no steam emissions from the whistle, however there is steam from the challenger whistle. On the V2 versions of both the cylinder cox do not function with no steam emissions. The original IHH versions work and have very weak emissions. All of my other steam Addons (Gtrax, Cab Forward) function perfectly.

When adding the BB to a new scenario, the tender when added has a challenger number which can be changed.... strange since the flyout box has entries for both Bb and challenger tenders.

I am beginning to believe that the problem is my somewhat low-end system. Any advice/help would be greatly appreciated.
Brian

Image
bwfer
 
Posts: 161
Joined: Sat May 05, 2012 5:04 pm
Location: Los Angeles, CA

Re: Is it just me???

Unread postby buzz456 » Fri Nov 23, 2012 7:14 pm

bwfer wrote:I have both versions of the Big Boy and Challenger. The issue I have with both of these Addons is there is no steam emissions from the turbo generator, pop valves, injectors etc. On the BB no steam emissions from the whistle, however there is steam from the challenger whistle. On the V2 versions of both the cylinder cox do not function with no steam emissions. The original IHH versions work and have very weak emissions. All of my other steam Addons (Gtrax, Cab Forward) function perfectly.

When adding the BB to a new scenario, the tender when added has a challenger number which can be changed.... strange since the flyout box has entries for both Bb and challenger tenders.

I am beginning to believe that the problem is my somewhat low-end system. Any advice/help would be greatly appreciated.


There is lots of steam coming off the top of these guys. The cylinder cocks do work with large amounts of steam. Good luck. Something is amiss. **!!bang!!**
Buzz
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20940
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: Is it just me???

Unread postby bwfer » Fri Nov 23, 2012 7:16 pm

I figured as much... Thanks Buzz...
Brian

Image
bwfer
 
Posts: 161
Joined: Sat May 05, 2012 5:04 pm
Location: Los Angeles, CA

Re: Is it just me???

Unread postby arizonachris » Sat Nov 24, 2012 11:19 am

Brian, only thing I can think of is, what your graphics setting is at? Should be 10. (the in game settings) Or you will lose a lot of stuff like signal gantries, water sand and coal towers, lots of stuff.

I don't have and am not gonna buy the "new" Big Boy and Challenger so I don't know how they perform. !*don-know!*
Ryzen 7 2700K, Asus Prime X570P, 32Gb DDR4, 2x 1Tb M.2 SSD's, RTX2060 6Gb, Occulus Rift
Win 10 Pro 64bit, keyboard/ mouse/ wheel/ pedals/ baseball bat
Security Coordinator on the Battleship Iowa
User avatar
arizonachris
 
Posts: 3956
Joined: Sun Mar 21, 2010 10:36 am
Location: Southern California

Re: Is it just me???

Unread postby buzz456 » Sat Nov 24, 2012 12:39 pm

Start up with cylinder cocks open.
newbig1.jpg
newbig2.jpg
newbig3.jpg
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 20940
Joined: Sun Mar 21, 2010 8:30 am
Location: SW Florida

Re: Is it just me???

Unread postby bwfer » Sat Nov 24, 2012 5:20 pm

Thanks guys.

Chris... I have all my settings for scenery/detail maxed.

I am perplexed to say the least. For the Big Boy both versions have no steam emissions at all. Both versions of the Challenger have steam emissions for the whistle. The IHH Challenger does have cylinder ** steam emissions, V2 does not. All of my other steam addons function perfectly which include the RSC Cab Forward, GTrax SP&S Northerns, SP Daylight 4-8-4s, and NKP Berkshires in addition to most of IHH UK Steam, and JT Pacifics. Oh, and a few of the Britlits steamers.

For the record I have verified the game cache file integrity and Clear the blueprint cache every time prior to starting TS2013 which increases the loading speed on my system.

RailWorks 2012-11-23 20-21-51-75.jpg


Apparently I'm not the only one with this problem... Splash Screen from TS2013 startup show the IHH BB with no stean exhaust from the turbo generator.
You do not have the required permissions to view the files attached to this post.
Brian

Image
bwfer
 
Posts: 161
Joined: Sat May 05, 2012 5:04 pm
Location: Los Angeles, CA


Return to Problems and Peculiarities

Who is online

Users browsing this forum: shae2022 and 7 guests