CBQ Big Horn Subdivision Scenario problems

[railbard]

Having problems with two scenarios for the Big Horn Sub.

The first is the Coal Drag scenario with the GP7. The controls lock up because the brakes are stuck in Emergency and when you try to move the brake control (or the throttle or the reverser) they just snap back to where they were, whether using the mouse or the keyboard.

The second is one of Doug Smith's scenarios, the AUTOmotive. I get an error that it cannot find the Driver Destination 32.

If anyone could offer suggestions, or Michael and/or Doug have a fix, I'd be appreciative.

Thanks!

[hughes407]

In the first case, the GP7 is probably in what I would call "expert" mode. This isn't the expert controls that RailWorks provides as an option rather a model that attempts to more realistically model the operation of a real GP7. There should be an engine with "simp" appended to the name also available in the same folder. This model uses the controls provided by RailWorks and is probably what you are expecting. Use RWTools to swap out the engine in the scenario with the simple version.

In the second case, the scenario is written for RW2 and does not work in RW3.

Don