Page 1 of 2
G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 1:54 pmby Brickrail782
I just installed the freeware G-Trax well cars from the file library, but the containers do not show up when the cars are loaded. I checked the file path and everything seems to be pointing in the right direction. Exactly what's going on, and how can I fix it?
Re: G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 2:48 pmby buzz456
Pointing to what containers?
Re: G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 4:12 pmby Brickrail782
The containers that came with the pack.
Re: G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 4:53 pmby buzz456
Are you talking about the Portland Terminal well cars?
Re: G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 6:52 pmby ErikGorbiHamilton
buzz456 wrote:Are you talking about the Portland Terminal well cars?
freeware G-Trax well cars from the file libraryI assume he is talking about
these...There was an older pack on here that had single 48' wells as well, but I can't seem to find them in the library. Those might have been removed?
Re: G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 7:30 pmby Brickrail782
Re: G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 8:48 pmby buzz456
Did you do the RWP? Here is where the files should be.
G-Trax well cars.jpg
Check it out and see if these all have something in there. We can figure this out because I know it works here.
Re: G-Trax containers not showing up when loaded.
Posted:
Thu Dec 27, 2018 11:19 pmby Brickrail782
Currently away from my computer at the moment, will check tomorrow morning.
Re: G-Trax containers not showing up when loaded.
Posted:
Fri Dec 28, 2018 8:07 amby ex-railwayman
No, that's the wrong one Buzz, this is what the pathing structure looks like in 7zip, I've just downloaded it -
Everything should be there, wellcars and shipping containers, although, I don't know how many containers there actually are.
Cheerz. Steve.
Articulated Stacks.jpg
Re: G-Trax containers not showing up when loaded.
Posted:
Fri Dec 28, 2018 8:39 amby Brickrail782
ex-railwayman wrote:No, that's the wrong one Buzz, this is what the pathing structure looks like in 7zip, I've just downloaded it -
Everything should be there, wellcars and shipping containers, although, I don't know how many containers there actually are.
Cheerz. Steve.
Articulated Stacks.jpg
I'm not talking about the articulated stacks, I'm talking about the pack that I linked to a few posts above.
Re: G-Trax containers not showing up when loaded.
Posted:
Fri Dec 28, 2018 8:41 amby Brickrail782
buzz456 wrote:Did you do the RWP? Here is where the files should be.
G-Trax well cars.jpg
Check it out and see if these all have something in there. We can figure this out because I know it works here.
All folders are there and contain their proper files.
Re: G-Trax containers not showing up when loaded.
Posted:
Fri Dec 28, 2018 10:53 amby buzz456
Brickrail782 wrote:I just installed the freeware G-Trax well cars from the file library, but the containers do not show up when the cars are loaded. I checked the file path and everything seems to be pointing in the right direction. Exactly what's going on, and how can I fix it?
Let's back up a second. You said the loads don't show up when you load the cars. The default is for them to be empty. You need to highlight them and a flyout should appear on the right side. You check that and then the load appears.
Re: G-Trax containers not showing up when loaded.
Posted:
Fri Dec 28, 2018 11:14 amby gtrtroger
Buzz, this intrigued me, so I went testing.....
I had these installed plus the UP mod as well....
Built a new scenario, added each of the well cars, then clicked each to load it...
No go.... no load.
I uninstalled and reinstalled the Doublestacks (GX_DblStacks_RW1.rwp)(via Utilities), created a new scenario, added each car and attempted to load them....no go.
(PS. The Articulateds loaded just fine.)
EDIT: The containers are in .../RailNetwork/Interactive
Re: G-Trax containers not showing up when loaded.
Posted:
Fri Dec 28, 2018 1:05 pmby buzz456
gtrtroger wrote:Buzz, this intrigued me, so I went testing.....
I had these installed plus the UP mod as well....
Built a new scenario, added each of the well cars, then clicked each to load it...
No go.... no load.
I uninstalled and reinstalled the Doublestacks (GX_DblStacks_RW1.rwp)(via Utilities), created a new scenario, added each car and attempted to load them....no go.
(PS. The Articulateds loaded just fine.)
EDIT: The containers are in .../RailNetwork/Interactive
The containers for these cars are in the common folder. Look at my post above and see if they are there.
Re: G-Trax containers not showing up when loaded.
Posted:
Fri Dec 28, 2018 2:00 pmby Brickrail782
buzz456 wrote:gtrtroger wrote:Buzz, this intrigued me, so I went testing.....
I had these installed plus the UP mod as well....
Built a new scenario, added each of the well cars, then clicked each to load it...
No go.... no load.
I uninstalled and reinstalled the Doublestacks (GX_DblStacks_RW1.rwp)(via Utilities), created a new scenario, added each car and attempted to load them....no go.
(PS. The Articulateds loaded just fine.)
EDIT: The containers are in .../RailNetwork/Interactive
The containers for these cars are in the common folder. Look at my post above and see if they are there.
That's strange, my install shows them to be a few steps down in the RailNetwork folder.