Railworks America

I a'm trying to run NS-local 2 and at the cement plant dry deliverys but it will not load.
But how can i load at a delivery point? (pic)

Will someone me point in the right direction?
All help wellcome. Thanks in advance
Ton

what you are seeing is an UN-loading point, any loading point is from above, and unloading is underneath!

thecanadianrail wrote:what you are seeing is an UN-loading point, any loading point is from above, and unloading is underneath!

When I used the "unloader" on my route it would unload and load depending on whether the car is loaded or not-loaded.

Harold

Ton,

The problem with the Local 2 scenario is that it sends you to the Cement Plant rather than the Quarry. There is no loader at the location called for in the task list. I had to edit the scenario to go to the quarry loader and all is well with the world now.

By the way, I have a note that the hoppers need to be loaded back to front. As I recall, it has to do with blocking the run-around track if you do it front to back.

Don

Thanks Don. Frontend loading was the second try. First did a backend. Starting over ( no problem ) will it work
if i go to the quarry instet of the cementplant?
Will check that out.
Thanks sofar.
Ton

No, Ton, it won't. The instructions in the scenario require you to go to the Cement Plant rather than the Quarry. It requires you to do a load which you cannot do at that location, to the best of my knowledge.

I haven't used the forum messaging system here but if you can get a message through to me with your e-mail address, I'll send you the scenario as I have modified it.

Don

Correct. It did'nt work. Verry kind to send your versie. Will send email.
Ton