Railworks America

I downloaded the mainelines mec plate c boxcar but they don't show up.
I have the original plate c and also made sure I checked off the mainlines box during scenario set up but they still do not show.

Thanks for any response.

Looks like the Bogie section of this car's bin file references a BN1-50ftPlateC car which would have to be installed on your system for the MEC car to work.

CGW44, you would need to download the pack below to get the bogie that is referenced in the MEC repaint.

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1912:fmc-plate-c-boxcars-multiple-roads&catid=19:rolling-stock-repaints


Whilst you are at it, I would strongly recommend downloading the rest of the repaint packs for this fantastic model.

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1486:railbox-repaints-2&catid=19:rolling-stock-repaints

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1481:fmc-plate-b-repaints&catid=19:rolling-stock-repaints

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1660:fmc-50ft-plate-c-rahway-valley&catid=19:rolling-stock-repaints

http://railworksamerica.com/index.php/download-library/rolling-stock-repaints?view=document&id=1948:providence-worcester-plate-c-fmc&catid=19:rolling-stock-repaints

Well I tried to download the PlateC_Pack1 file but it shows up as a word file with a .rar extension.

.rar is a compressed file like .zip

the program 7zip can open it, not sure why it says it's a word file

All problems are now resolved!!

I figured out that I had to open the file with winzip and installed everything and now the mec boxcars show up along with some nice new one's.

Thanks for the help!