NRD Commercial and Industrial Buildings Pack 1 Missing Textures

[reef75]

Hi all. Complete new guy and from the UK too so hope you don't mind me asking here or if it is the right place to ask at all. I just found the above pack and installed and I come up with a few missing textures. What looks to be missing are a skylight, concrete and rusty texture possibly all off one sheet. It's a fantastic pack and ideal for my route and even with the missing textures there is still plenty I can use. I did put a search up for John Lippai but could find no posts of anyone else having this issue. Thanks for any help and for letting me aboard your forum.

Stephen.

[fraserm]

Hello, Stephen, and welcome to RWA! You'll find a lot of helpful folks here who enjoy running trains in TS2015.
As to your question, I also have that pack but have not noticed the missing textures. Sometimes TS does not install 100% correctly so I'm going to suggest that you might try to reinstall the pack and see if that helps. If not maybe someone else might have another suggestion.
Again, welcome!
Best,
Marc

[glenn68]

Hello, Stephen, and welcome to RWA! You'll find a lot of helpful folks here who enjoy running trains in TS2015.
As to your question, I also have that pack but have not noticed the missing textures. Sometimes TS does not install 100% correctly so I'm going to suggest that you might try to reinstall the pack and see if that helps. If not maybe someone else might have another suggestion.
Again, welcome!
Best,
Marc

Stephen,
I agree with Mark, I have this happen before with other assets.

[reef75]

Thanks for the response and welcome guys. No Joy yet though. I've tried 3 installs through utilities and moved the texture folders over with 7zip directly, still they are missing. Is it possible as that textures are missing from an earlier item I do not have but you guys do ? I only ask as in the readme it says to allow to overwrite previous texture files, as John reuses them from project to project. It would explain why my install has missing textures but yours do not, providing you have already, other john Lippai items. Clutching at straws here

Stephen.

[buzz456]

Can you take some pictures or tell us the missing file names? I'm pretty sure I have everything and would be happy to pack them up and send them to you if I knew what you are missing.

[reef75]

Hey buzz, thanks for the help. So far I've tried installing 4 times and also installed Johns other packs in case it was a texture from them but no to that one. Screeny below of some of the missing textures.



Items are back left, Coca Cola bottling plant...Skylights and gutters missing.
Above right with gantry, NSRS building 15...Gantry and roof vent textures missing.
Bottom left, NRRS building 2...Coping stone texture missing.
Bottom right, Concrete pipe stack...Concrete texture missing.

There are others but feel most are common textures apart from a rusty shack I forgot to snap that has no textures at all. I'm going to re download the package and try a re install from scratch and see if it helps. Thanks again for the help, will let you know if it works. P.S. Just tried fresh install, same textures missing.

Stephen.

Another Edit Just installed John Lippais Trestle bridge pack and now have half of the missing textures from my missing items. Things like The gantry and skylights in the above screen are now ok. Still missing the concrete pipes and coping stones. Also rusty shack is still textureless. Getting somewhere now though, in a round about way.

[buzz456]

Check your PM.

[reef75]

Cheers Buzz, will give the concrete texture a try. Pic below of whats missing.

I think its small shack rusty in bottom right. At power plant and NSRS power plant missing chimney textures but these are not important if unknown. I'm quite happy with what I have so far



Stephen.

P.S. no sorry Buzz, that concrete texture did not work.

[buzz456]

Where did you put it? It needs to go in the clutter texture folder.

[reef75]

I put it in both the clutter and buildings texture folder in case it was also used for the missing coping stones. I'll double check to be sure and will drop in the NS text you just sent, thanks.

P.S. For whatever reason my RWtools is asking me a donation again and not sure where I kept my key Anyway with 1 try left I found the concrete pipes are looking for concretebare03s texture in /structures/textures so probably why the one you sent did not show. I think its prob best if I sort out my RWtools first then i'll be able to find exactly whats missing and stop wasting your time trying to guess whats missing. Will still try the NS textures you sent though. Cheers for your efforts so far !

Stephen.

[reef75]

The only 3 textures I can find missing from looking with RW tools are

concretebare03s from /structures/textures for the pipe clutter
pipe from /procedural/textures for NRRS building 2
ten5 from /structures/theten/textures for Small Shed Rusty (I don't even have theten folder)

The NS file you sent over I already have them in the same folders. I do not know enough about the files to find the missing textures for these power plants but not too fussed as I did not plan to use them.

Really appreciate the time you have taken to try sort this Buzz. I have most of Johns assets working now and will be great for the route, he has done some great stuff. Seems odd these textures are missing and can only assume they come from prior items others already had ? Thanks again...

Stephen.

[reef75]

Big thanks to Buzz for sending me what I needed Always nice to get home from work with a package waiting to be opened. Even if it is only a few textures but they have done the trick and at least now I can crack on with my small route. Thanks again bud !!

Stephen.

[ex-railwayman]

Having had to re-install my entire scenery asset folders, I now appear to also be missing some of these textures, the concrete pipe stack and a billboard, I have the NRD_DrPepperSign.bin file and GeoPcDx, but, no textures whatsoever that can be applied to them, and there are no textures in the folders at all for pipes or billboards/signs. I have downloaded lots of 3rd party routes hoping to find John Lippai's individual assets, but, to no joy, does anyone know any routes that might have these textures included so I can update my scenery folders, please.

Cheerz. Steve.

[buzz456]

There is probably a lot of junk you don't need but see if what you do want is here. If not I'll find it for you.
https://www.dropbox.com/s/fv7098t489wjo ... s.zip?dl=0

[ex-railwayman]

Buzz you are indeed a star, thank you so much, I now have the missing textures, the concrete pipe stack was in a folder on its own which I didn't even have, and the Dr Pepper sign shows up as well now, I can adorn my routes in more goodies, much obliged to you Sir.

Cheerz. Steve.