GP40 issues

[NSrailfan6130]

Ok i have downloaded some gp40's repaints from the ever amazing Jessie James and i put the cab Geo and the gp40 Geo in but they still show up blank but they do make the clank sound.
It was the ex chessie system now B&O repaint and the csx repaint. Any ideas

[buzz456]

Are the couplers showing?

[NSrailfan6130]

Let me check buzz, I didn't post prepared I just fiddled with Geo files so it might work because i did get the OVS gp40 to show up and it uses GX Gp40 01.geo but the asset setup from the gp40's from digirails put in the GX Gp40 02.geo

[NSrailfan6130]

It'snot showing on the list now buzz

[SOO704]

The Geo is already in Cab Cab Geo should Be GP40_CSX-6544_cab.GeoPcDx the the Name of each loco in the red section should be the name of each loco, but it should be right, just put in the Geo GX_GP40_02.GeoPcDx in the main Locomotive file and it should work.

[HankySpanky]

Try this -

viewtopic.php?f=29&t=10390

It sounds like sort of the same thing.

[NSrailfan6130]

Well with that at least the engine is showing, just not the right skin, here i have nothing showing, but i put in the geo's

[HankySpanky]

Why are you always having problems? Methinks you need to give your PC an enema or get a new one.

Meanwhile, If you don't have RW Tools, get it. That will pinpoint 90% of problems.

[NSrailfan6130]

Im always having problems because im still new to railworks

[buzz456]

Why are you always having problems? Methinks you need to give your PC an enema or get a new one.

Meanwhile, If you don't have RW Tools, get it. That will pinpoint 90% of problems.

I think he needs to spend less time posting every thirty seconds and spend a little more time concentrating on getting things in the right place.

[NSrailfan6130]

well i have put in multiple geo's since Portland terminal has the 3 gp40's each one has a diff geo file but none work

[harryadkins]

Be patient. It takes time to get the hang of installing reskins. Every artist seems to have a different technique.

[Chacal]

You installed the Portland Terminal route and you can see and use the included GP40?

[NSrailfan6130]

Yes and the OVS gp40 from here works http://www.ovsrails.com/downloads/rwdownloads.htm but not any of Jessie's

[buzz456]

Yes and the OVS gp40 from here works http://www.ovsrails.com/downloads/rwdownloads.htm but not any of Jessie's

Read what SOO704 said. Do you have the GX_GP40_02.GeoPcDx file in the Locomotive folder? It works here so it should work for you. This same folder should have a GX_GP40_02.bin in it.

CSX6364.jpg