I have switched around both units multiple times and the problem persists. Any ideas?Ann Arbor GP38's and route
First unread post • 3 posts
• Page 1 of 1
Ann Arbor GP38's and route
by Bdwall99 » Sat Dec 07, 2013 1:52 pm
Whenever I put an Ann Arbor GP38 in the lead of a train on the Ann Arbor Route, the horn and bell will NOT work on the lead unit, but will on the trailing unit I have switched around both units multiple times and the problem persists. Any ideas?
I have switched around both units multiple times and the problem persists. Any ideas?-
Bdwall99 - Posts: 22
- Joined: Sun May 20, 2012 11:49 am
- Location: Norfolk Southern Piedmont Division
Re: Ann Arbor GP38's and route
by buzz456 » Sat Dec 07, 2013 2:13 pm
Yes I just looked. I have it aliased to JCornell GP38-2 because I liked the horn a lot better and forgot all about it. If you have the Cornall unit all you have to do is check it on the right flyout and you'll have horn sound. Otherwise I'll do a new bin file and post it here for now. 
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20939
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: Ann Arbor GP38's and route
by buzz456 » Sat Dec 07, 2013 5:11 pm
Here are replacement bin files for the CREWED Ann Arbor GP38-2s. Unzip and replace the ones that are in there and you will have the RSC horns.
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20939
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
3 posts
• Page 1 of 1
Return to Problems and Peculiarities
Who is online
Users browsing this forum: No registered users and 1 guest