MRL 50ft

[buzz456]

PlateB and yes has auto numbering. Let me repeat they all work fine here but at least a couple of people have problems.

[NStrains]

I just compared files to another known repaint that works and the FEC, SOU and MRL all have the same files as the working one. Something during the install not go right maybe?

[MaineLines]

I found that the two Bogie references in the .bin file for the MRL box point to a LRR50ft folder rather than the MRL folder so, unless you happen to have a boxcar with that folder installed, the MRL box will not show up.

[harryadkins]

Oops! That's my fault. I will correct the bin file re-upload. It's so easy to miss details. Apologies...

Harry

[harryadkins]

Here's a link to the repaired MRL 50ft FMC Boxcar file. Please let me know if you have problems. I will also upload a version 2 (fixed) copy to the library. Again, my apologies for the inconvenience. Aren't you glad we have the RWA community where we can work together to help each other out.

Harry



https://www.dropbox.com/s/qs0tp8hm29z0p ... v2.7z?dl=0

[buzz456]

Here's a link to the repaired MRL 50ft FMC Boxcar file. Please let me know if you have problems. I will also upload a version 2 (fixed) copy to the library. Again, my apologies for the inconvenience. Aren't you glad we have the RWA community where we can work together to help each other out.

Harry



https://www.dropbox.com/s/qs0tp8hm29z0p ... v2.7z?dl=0

[ssbobz]

That has fixed the MRL, thank you all very much.

I suppose the FEC and SOU may have the same issue?

[harryadkins]

I will check the FEC and SOU reskins.

Harry

[mainecentral250]

All set Thank You.

[harryadkins]

FEC-SOU Fix

Run RW_AssetSetup to install updated .bin files for my FEC and SOU 50ft FMC Boxcar reskins. Sorry for the inconvenience. This should fix the incorrect link to the LRR50ft boxcar.

Harry Adkins
June 2016

https://www.dropbox.com/s/i8afzqa5oyh8u ... ix.7z?dl=0

[ssbobz]

Thank you very much for the fix and I appreciate your many works.

This LLR50ft boxcar, where might I find it? I'm always interested in new additions to my stable.

[NStrains]

Thank you very much for the fix! They all work now!

[harryadkins]

The LLR rollingstock was done for the good folks at NERW (http://www.vnerrforums.com/nerw/). They are developing a Lafayette to Frankfort route that is going to be superb. Be sure to get it when released. You won't be disappointed.

Harry