Blackwood Creek

[Griphos]

Buzz's elegant solution should fix the problem for you. Perhaps try again and follow his instructions carefully. Remember to copy all the files inside your /Assets/RSC/PennCoal/Scenery/Blocks folder. You will probably have to unpack or look inside the PennCoalAssets.ap file inside your /Assets/RSC/PennCoal folder. This is a zip file and you can look inside it with Winrar or similar zip file viewer. Inside this zip file will be the /Scenery/Blocks folder.

Then just paste all those files in the folder structure Buzz provided.

[trev123]

Okay, so if i am understanding right, PacificSurfliner is the path for these textures, that explains it then, I don't have that route, I have PennCoal route. Which if it is using the same textures of that block, I just need to get the right path which would then be the PennCoal.

That's correct, NS349. Follow Buzz's folder structure and you should have it.

Also, you do have Sherman Hill if you have a full install of TS2016. If you didn't, I think there would be many more missing textures.

And finally, it's LtBligh, not LtBlight!! Terribly sorry for the typo!!

Best To All,
tagsdm

So I tried what Buzz said to do, and still the textures are missing.. I don't want to make this Thread forever on going, It seems the way the route is made, requires multiple DLC etc.. So once I can purchase the routes that was mentioned that should solve it from my understanding, For a route that is free I seriously can't complain or don't mean for this to be a serious issue, I am just picky and like to have the route as anyone else would without anything missing.

Also, Tagsdm I don't have the Sherman Hill Route, I didn't see it listed in the game or its content, I do have TS2016 however, each year when the game updates it automatically switches and updates to the new content I am assuming? Its a fresh install on a new PC, which the game was installed back in January 2016

You haven't said if you have Donner Pass. Don't think that would be much of an issue as it only requires characters.

[NS349]

I don't have the Sherman Hill Route, I didn't see it listed in the game or its content

No kidding?!?! Do you have the UK Riviera Line in the 50s? How about the UP gas turbine? Are you sure you have a full install (payware) or the free upgrade, which may not have those routes. Actually, if you have a full install of TS2016, you should have two of the three routes on your PC, PennCoal and Sherman Hill. The only DLC I bought for Blackwood Creek was Colton Northern. That's one of LtBligh's routes' best features, minimal DLC required. Some want you to have $100s of DLC. Anyway, I think most of us have a full install of TS2016 and sort of take it for granted everyone does. I haven't tried Buzz's fix, but of course buying Pacific Surfliner is the easy (but more costly) way to fix it.

According to RW_Tools, if you don't have Sherman Hill, you'd be missing quite a few assets on Blackwood Creek. Buildings, lights, procedurals, quite a lot. If your Blackwood Creek seems OK, maybe these assets are coming from somewhere else. I dunno. Could you post a few screen shots?

Keep Trying, It's Worth It,
tagsdm

Nope Don't have those routes either, a while back back in 2011, I purchased railworks, at that time I believe it was TS2012, after each year, it would update to TS2013 to what is now currently TS2016. So through time I had to figure out what each update did or didn't do etc.. still learning to this day. And that's where I am now, I have purchased a lot of routes and units through the years, as everyone knows that DLC is expensive.

Sounds to me this route uses a lot of assets used in multiple DLC Routes as other's do the same. I can post some shot's but as I mentioned before, this route is awesome from just going through quickly and that's how i found out I was missing some block textures.

Buzz's elegant solution should fix the problem for you. Perhaps try again and follow his instructions carefully. Remember to copy all the files inside your /Assets/RSC/PennCoal/Scenery/Blocks folder. You will probably have to unpack or look inside the PennCoalAssets.ap file inside your /Assets/RSC/PennCoal folder. This is a zip file and you can look inside it with Winrar or similar zip file viewer. Inside this zip file will be the /Scenery/Blocks folder.

Then just paste all those files in the folder structure Buzz provided.

Griphos, I did exactly that. I copied everything from PennCoal/Scenery/Block Folder, and paste those files into what Buzz provided and still these textures are missing.

[buzz456]

Just to be clear you put all these items plus the stuff below what you can see into the Blocks folder? I wonder if you have to have the PacificSurfliner checked in the asset box since you really don't have the route maybe.

Blocks.jpg

[NS349]

Just to be clear you put all these items plus the stuff below what you can see into the Blocks folder? I wonder if you have to have the PacificSurfliner checked in the asset box since you really don't have the route maybe.

Blocks.jpg

That is correct Buzz, I also checked to see if PacificSurfliner was checked, it was and still the textures are not showing. Also something I just noticed is the PC Block 02 is missing textures so maybe this is an dlc error?

[NS349]

UPDATE, Got it fixed. I purchased Pacific Surfliner and that did the trick, so that was the issue need that route/assets in order for it to work properly. Thanks again for everyone's feedback and help.