Buzz
no couplers
First unread post • 8 posts
• Page 1 of 1
no couplers
by buzz456 » Sun Apr 03, 2011 9:16 pm
Ok, I must have gone brain dead. Been messing with this for hours. Tried to load Mike's MP coach and have no couplers. All the other Brit Kit coaches are OK. Any ideas?
Buzz
Buzz
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20949
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: no couplers
by MadMike1024 » Sun Apr 03, 2011 10:17 pm
buzz456 wrote:Ok, I must have gone brain dead. Been messing with this for hours. Tried to load Mike's MP coach and have no couplers. All the other Brit Kit coaches are OK. Any ideas?
Buzz
Seriously odd... have you downloaded and installed the default pack? Do the couplers appear when you switch to drive mode?
- MadMike1024
- Global Mod
- Posts: 1730
- Joined: Fri Jul 30, 2010 8:11 pm
- Location: Vancouver, WA
Re: no couplers
by buzz456 » Sun Apr 03, 2011 10:28 pm
Yes and the couplers are there on them. I discovered it by the scenario crashing when I tried to back your spiffy locos up to the cars.
Buzz
Buzz
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20949
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: no couplers
by MadMike1024 » Mon Apr 04, 2011 1:15 am
buzz456 wrote:Yes and the couplers are there on them. I discovered it by the scenario crashing when I tried to back your spiffy locos up to the cars.
Buzz
Just packaging some other stuff, will try it out.
A While later: I'm having no problem, if other cars couple properly, I'd suggest you uninstall the coach and reinstall the.rwp.
- MadMike1024
- Global Mod
- Posts: 1730
- Joined: Fri Jul 30, 2010 8:11 pm
- Location: Vancouver, WA
Re: no couplers
by PapaXpress » Mon Apr 04, 2011 1:58 am
You'll find a few topics about missing couplers here. I was plagued with them missing in both edit and play mode. I would like to say that I know what I was doing when they started working again in play mode, but the only suggest that you download the replacement couplers from Britkits and it did the trick.
"Just post some random unrelated text. We have members here who can help you with that." ~ Chacal
"When all else fails, read the instructions... if that doesn't work either, try following them." ~ Old Prof
The Grade Crossing - Atlanta North Project - Virtual Rail Creations
-
PapaXpress - Posts: 5147
- Joined: Sat Oct 23, 2010 10:30 pm
- Location: that "other" timezone
Re: no couplers
by buzz456 » Mon Apr 04, 2011 6:27 pm
Tried all that and no joy. Maybe I'll re download and try again.
Buzz
Buzz
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20949
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: no couplers
by LoneWolfDon » Mon Apr 04, 2011 6:43 pm
Don't know having an ATI card could be related to the problem... but if so, from the ATI's control panel, you've already tried turning-off the "Adaptive Anti-Aliasing (AAA)" option? As in some cases with RailWorks having AAA enabled it can sometimes cause odd behavior such as missing / invisible graphics on some models and/or routes.
Last edited by LoneWolfDon on Mon Apr 04, 2011 9:56 pm, edited 1 time in total.
RailWorks Route & Scenario addons, video tutorials and other resources at http://www.RRYard.com
-
LoneWolfDon - Posts: 279
- Joined: Wed Dec 16, 2009 1:41 am
- Location: Canada
Re: no couplers
by PapaXpress » Mon Apr 04, 2011 6:46 pm
Make sure that you backup the original coupler folder and replace (not overwrite, in fact remove the original folder completely after backing it up) it with the Britkit's folder. Then run the bat file, and finally (and I am saying this just to be sure) clear out the blueprints.
It took me a few tries to get there, and as I said I still don't have couplers in edit mode, but play mode is working fine.
It took me a few tries to get there, and as I said I still don't have couplers in edit mode, but play mode is working fine.
"Just post some random unrelated text. We have members here who can help you with that." ~ Chacal
"When all else fails, read the instructions... if that doesn't work either, try following them." ~ Old Prof
The Grade Crossing - Atlanta North Project - Virtual Rail Creations
-
PapaXpress - Posts: 5147
- Joined: Sat Oct 23, 2010 10:30 pm
- Location: that "other" timezone
8 posts
• Page 1 of 1
Return to Problems and Peculiarities
Who is online
Users browsing this forum: No registered users and 1 guest