Hi,
I thought I would try this route out.
When I loaded it it looks good except for the lack of signals on the mainline. Signal gantries are there but all signals are missing. The lineside yard signals are working OK.
I think I have all the assets required and a check with TS Tools did not find any missing assets. I have set the level of detail to 10 in World editor.
I would be grateful for any thoughts on this problem. Also can someone let me know which signal assets are used in the route ?
Thanks in advance,
John
jlms48
C&O Allegheny v5 missing signals?
First unread post • 3 posts
• Page 1 of 1
C&O Allegheny v5 missing signals?
by jlms48 » Sat Aug 08, 2020 9:11 am
- jlms48
- Posts: 103
- Joined: Mon Mar 19, 2018 7:15 am
- Location: Wales
Re: C&O Allegheny v5 missing signals?
by buzz456 » Sat Aug 08, 2020 11:29 am
It looks like Tory used both RCAP and SMM signal heads.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 20902
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: C&O Allegheny v5 missing signals?
by jlms48 » Sat Aug 08, 2020 12:06 pm
Thanks I'll check they are installed.
- jlms48
- Posts: 103
- Joined: Mon Mar 19, 2018 7:15 am
- Location: Wales
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest