Track rules

Help and support forum for Mike Simpson's RW Tools

Moderator: mikesimpson

Track rules

Unread postby anavelgato2004 » Thu Feb 16, 2017 12:54 am

Is there a way the change the track rules for a entire route using RW_Tools?

I'm trying to electrify the Fort kent to eagle lake route.
User avatar
anavelgato2004
 
Posts: 106
Joined: Thu Jan 07, 2016 1:03 am
Location: CP Bellflower

Re: Track rules

Unread postby gwgardner » Fri Feb 17, 2017 10:22 am

Read around here in the forum on the subject for details, but you can use RWTools to edit the route's tracks.bin file. If you open that file for editing in RWTools and parse down you'll see the entries for your current track rule and type of track from that rule. You can change those entries to what you want.

There entries for each section of track, so you'll have to do multiple changes, or the use the global find and change method.

DO A BACKUP OF YOUR ROUTE FIRST!
gwgardner
 
Posts: 580
Joined: Tue Jan 25, 2011 3:34 pm

Re: Track rules

Unread postby buzz456 » Fri Feb 17, 2017 1:04 pm

The tutorial for RWTools from Mike is very clear how to do this. I changed the Far North Route to ScaleRail and was successful on my first try.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
Image
User avatar
buzz456
Site Admin
 
Posts: 13973
Joined: Sun Mar 21, 2010 9:30 am
Location: Sycamore, Il

Re: Track rules

Unread postby ssbobz » Fri Feb 17, 2017 1:19 pm

If I may tack onto this thread for a partially related question ...

How critical is the advice I often see about not having more than one track rule on the route, and actually why would one consider doing that in the first place? I know the track rule affects data like allowed curvature and such, does it also affect appearance?
ssbobz
 
Posts: 475
Joined: Thu Feb 11, 2016 11:54 am

Re: Track rules

Unread postby gwgardner » Fri Feb 17, 2017 5:27 pm

On my route I use three different track rules with no apparent problem. 1 for the interurban track, one for the 'yellow dirty' and 'bridge' track (GN Mainline trackrule), and one for short segments of 'rail only' track for ashpits (ATSF track rule).

Yes, the appearance of different types of track within a track rule can be and often are different from similar track types in other track rules. In the example I gave above, the 'rail only' track from the ATSF track rule is clearly a different rail size from that of the GNMainline track rule, but all are standard gauge.
gwgardner
 
Posts: 580
Joined: Tue Jan 25, 2011 3:34 pm


Return to RW Tools

Who is online

Users browsing this forum: No registered users and 1 guest